Bissoy.com
Doctors Medicines MCQs Q&A

Combination die is a die which combines cutting and non-cutting actions in the blanking process.

Combination die is a die which combines cutting and non-cutting actions in the blanking process. Correct Answer True

In a combination die, the cutting action like blanking or punching is combined with the non-cutting actions like forming which may further include bending, drawing and extrusion process. More than one operation can be possible in single stroke with the help of combination dies, but the die is more applicable for two operations only.

Related Questions

Consider the following statements: 1. Robots take permissible actions only. 2. All actions that are obligatory for robots are actually performed by them subject to ties and conflicts among available actions. 3. All permissible actions can be proved by the robot to be permissible and it can be explained in ordinary English. Which of the above statements are correct?
In how many of the following applications, wire cut EDM can be used? – Manufacturing of progressive, blanking and trim dies – Extrusion dies – Cutting difficult to machine materials like hastaloy, inconel and titanium – Cutting narrow slots and keyways – Manufacturing of parts where burrs can’t be tolerated.
Consider the following statements: 1. HSS tools wear very rapidly, whereas in cemented carbide tools, even though hardness is retained, crater wear can occur due to solid-state diffusion. 2. Cutting tools made of Super-HSS, also known as cobalt-based HSS, are made by adding 2% to 15% of cobalt which increases the cutting efficiency at heavier cuts by increasing the hot hardness and wear resistance. 3. Tools failure due to excessive stress can be minimized by providing small or negative rake angles on brittle tool materials, protecting tool tip by providing large side-cutting edge angles, and honing a narrow chamfer along the cutting edge. Which of the above statements are correct?
Calculate the punch size in mm, for a circular blanking operation for which details are given below: Size of the blank                                                     25 mm Thickness of the sheet                                            2 mm Radial clearance between punch and die               0.06 mm Die allowance                                                          0.05 mm
Flank wear occurs mainly on the 1. Nose part of the cutting tool 2. Front relief face and side relief face of the cutting tool 3. Face of the cutting tool at the shortest distance from the cutting edge Which of the above is/are correct?
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image
Choose a figure which would most closely resemble the unfolded form of figure (Z).
Paper Cutting mcq question image