Bissoy.com
Doctors Medicines MCQs Q&A

High speed camera used in destructive testing can give very precise information about the failure of casting or material.

High speed camera used in destructive testing can give very precise information about the failure of casting or material. Correct Answer True

The high-speed cameras used in destructive testing have advance recording modes to capture almost any kind of destructive failure. After the failure of casting, camera stops recording and the captured images can be played back in slow motion which shows precise information, image by image during and after the destructive test.

Related Questions

What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
Each material circumstance appearing in evidence against the accused must be put to the accused specifically, distinctly and separately. In this context, the propositions are
1. Failure to put the material evidence to the accused always vitiates the trial
2. Failure to put the material evidence amounts to a serious irregularity which can not be cured and vitiates the trial, if it has prejudiced the accused.
3. Failure to put the material evidence is not considered to services & is curable if infact no failure of justice has occasioned to the accused.
Now which of the following is correct
Read the following passage carefully and choose the most appropriate answer to the question out of the four alternatives.
The human eye is a complex part of the body that is used for seeing. Eyes enable people to perform daily tasks and to learn about the world that surrounds them. Sight, or vision, is a rapidly occurring process that involves continuous interaction between the eye, the nervous system, and the brain. When someone looks at an object, what he really sees is the light reflected from the object. This reflected light passes through the lens and falls on the retina of the eye. Here the light induces nerve impulses that travel through the optic nerve to the brain and then over other nerves to muscles and glands.
The eye is similar to a television camera. Both the eye and the television camera convert light energy to electrical energy. The eye converts light to nerve impulses that are interpreted by the brain as the sense perception called sight. A television camera converts light to electronic signals that are broadcast and transformed into light images in a television receiver. It is wonderful that human eyes blink an average of once every six seconds. This washes the eye with the salty secretion from the tear or lachrymal glands. Each tear gland is about the size and shape of an almond. These glands are situated behind the upper eyelid at the outer corner of the eye. After passing over the eye, the liquid from the gland is drained into the nose through the tear duct at the inner corner of the eye. The eye is similar to the television camera because both
A 250 mm by 250 mm ingot casting, 1.5 m high and at 1225 K temperature, is stripped from its mold. The casting is made to stand on end on the floor of a large foundry whose wall, floor and roof can be assumed to be at 300 K temperature. Make calculation for the rate of radiant heat interchange between the casting and the room. The casting material has an emissivity of 0.85
In inspection of castings, destructive type of testing is more reliable than the non-destructive testing.
If Rati travels at his usual speed for ‘x’ hours, he covers the same distance as he covered when he travels at a speed 30 km/hr less than usual, but for (x + 3) hours. Which of the following can be determined? (A) If he travels at 20 km/hr less speed than usual, he can cover a distance of 240 km in (x - 1) hours. What is the value of ‘x’? (B) If travels at his usual speed for (t + 2) hours, and at 50% of his usual speed for (t - 2) hours, his average speed for the journey is 68 km/hr. What is his usual speed? (C) His usual speed (in km/hr) is a multiple of 5 between 40 and 50 (both inclusive). If ‘x’ is a whole number, what is his usual speed? (D) If he travels at his usual speed for ‘t’ hours, he covers a distance of 400 km. What is the value of ‘x’?
The below question contains a paragraph of 6 sentences. The first and the sixth sentences are given in the beginning and end and numbered 1 and 6 respectively. The four sentences in the middle are jumbled and labelled P, Q, R and S. Identify the proper order of these four sentences and mark the correct option. 1. In space navigation it is necessary to make complex calculations. P. In addition, it has to enter into the moon's orbit at a precise moment. Q. In other words it has to leave the earth's orbit at a precise moment. R. A rocket has to follow a precise path. S. Computers are able to perform extremely complex calculations. 6. A computer can perform the complex calculations which are necessary to work out the rocket's path precisely.
What is the normal order of activities in which traditional software testing is organized ? (a) Integration Testing (b) System Testing (c) Unit Testing (d) Validation Testing
Match the items in column 1 and column 2 and choose the correct combination. Column 1 Column 2 A - Resilience 1 – Ability of the material to return to the original shape when load is removed B – Fatigue 2 – Capacity of a material to absorb energy elastically C – Stiffness 3 – Ability of material to absorb a certain amount of energy without failure D - Elasticity 4 – Resistance of the material to elastic deformation   5 – Failure of material at loads less than that at normal conditions  
Read the following passage carefully and choose the most appropriate answer to the question out of the four alternatives.
The human eye is a complex part of the body that is used for seeing. Eyes enable people to perform daily tasks and to learn about the world that surrounds them. Sight, or vision, is a rapidly occurring process that involves continuous interaction between the eye, the nervous system, and the brain. When someone looks at an object, what he really sees is the light reflected from the object. This reflected light passes through the lens and falls on the retina of the eye. Here the light induces nerve impulses that travel through the optic nerve to the brain and then over other nerves to muscles and glands.
The eye is similar to a television camera. Both the eye and the television camera convert light energy to electrical energy. The eye converts light to nerve impulses that are interpreted by the brain as the sense perception called sight. A television camera converts light to electronic signals that are broadcast and transformed into light images in a television receiver. It is wonderful that human eyes blink an average of once every six seconds. This washes the eye with the salty secretion from the tear or lachrymal glands. Each tear gland is about the size and shape of an almond. These glands are situated behind the upper eyelid at the outer corner of the eye. After passing over the eye, the liquid from the gland is drained into the nose through the tear duct at the inner corner of the eye. What do we see when we look at an object?