Bissoy.com
Doctors Medicines MCQs Q&A

What is used for the storing of the liquid catalysed resin in Elastic reservoir molding?

What is used for the storing of the liquid catalysed resin in Elastic reservoir molding? Correct Answer Polyurethane

Flexible Polyurethane foam placed at the center of the sandwich acts an elastic reservoir for storing the catalysed liquid resin. This foam is compressed by exerting pressure for the liquid resin to flow out and infiltrate into the dry fiber reinforcement.

Related Questions

In Resin transfer molding, the catalysed liquid resin is injected into the mold through ___________
During rainy season, huge inflow of water takes place into a reservoir. Measures are taken to clear the reservoir while water keeps flowing into it at a constant rate. It has been observed that seven and five men can clear the reservoir in 20 and 50 days, respectively, with the initial quantity of water in the reservoir being 24 and 36 kilolitres, respectively. What is the rate of inflow of water into the reservoir in litres per day?
The water level in a municipal reservoir has been decreasing steadily during a dry spell, and there is a concern that the drought could continue for another 60 days. The local water company estimates that the consumption rate in the city is approximately 107 L/day. The state conservation service estimates that rainfall and stream drainage into the reservoir coupled with evaporation from the reservoir should yield a net water input rate of 106 exp (-t/100) L/day, where t is the time in days from the beginning of the drought, at which time the reservoir contained an estimated 109 liters of water. Integrate the balance to calculate the reservoir volume at the end of the 60 days of continued drought.
Resin P, on further heating turns into completely cross-linked resin Q, which is totally insoluble and infusible. Resin P is slightly heat fusible and insoluble in alkalis and alcohols but partly soluble in acetone. What are the names of resin P and Q?
The difference in Resin Transfer molding(RTM) and Structural Reaction Injection Molding(SRIM) is mainly in the resin reactivity.
A single reservoir supplies the petrol to the whole city, while the reservoir is fed by a single pipeline filling the reservoir with the stream of uniform volume. When the reservoir is full and if 40,000 liters of petrol is used daily, the suply fails in 90 days.If 32,000 liters of petrol is used daily, it fails in 60 days. How much petrol can be used daily with out the supply ever failing?
A single reservoir supplies the petrol to the whole city, while the reservoir is fed by a single pipeline filling the reservoir with the stream of uniform volume. When the reservoir is full and if 40, 000 litres of petrol is used daily, the supply fails in 90 days. If 32, 000 litres of petrol used daily, it fails in 60 days. How much petrol can be used daily without the supply ever failing?
Elastic reservoir molding is widely used in molding complex parts.
A glass reinforced polymer composite comprises of 35 volume % glass fiber and 65 volume % of polymer resin. The elastic moduli of glass and polymer resin are respectively 70 GPa and 3 GPa. The elastic modulus of the composite (in GPa) under iso-strain state is
A reservoir has two pipes, A and B. A can fill the reservoir 5 hours faster than B. If both together fill the reservoir in 6 hours, the reservoir will be filled by A alone in-