A device in which some portion of waste heat of flue gases is recovered to heat the air before it passes to the furnace for combustion purpose is known as __________

A device in which some portion of waste heat of flue gases is recovered to heat the air before it passes to the furnace for combustion purpose is known as __________ Correct Answer air preheater

A device in which some portion of waste heat of flue gases is recovered to heat the air before it passes to the furnace for combustion purpose, is knwon as air-preheater.
Bissoy MCQ

Related Questions

A device in which some portion of waste heat of flue gases is recovered to heat the air before it passes to the furnace for combustion purpose, is known as
Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percent furnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C.
Thermal conductivity based continuous flue gas analyser makes use of varying thermal conductivity of the constituents of flue gases. Which of the following constituents of flue gases has the maximum thermal conductivity?
A 15kg of air is supplied per kg of fuel burnt to the combustion chamber of a boiler using fuel 600kg/hr. the temperature of flue gases and ambient air are 273°C and 32°C. If the minimum draught required to start the flue is 9.5mm of water, find out the minimum height of the chimney?
In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the
Waste heat from the outgoing flue gases in a thermal power plant is recovered by a/an
A draught of 15mm of water is produced by using a chimney of height 30m. The ambient air and flue gases are at 27oC and 300oC respectively. The coal burned on the grate contains 81% carbon, 5% moisture and remaining ash. Neglect the losses and assume values of burnt products equivalent to the volume of air supplied and for the complete combustion of fuel, find the percentage of excess of air supplied?
Determine the height of chimney above grate level. Where diameter of chimney is 1.75m and produces a draught of 1.8cms of water. Temperature of flue gases is 290oC. The flue gases formed per kg of fuel burnt are 23kg. Neglect the losses and assume atmospheric temperature as 20oC?
The flue gases of natural draught are at higher temperature when compared to flue gases in artificial gas.
Incomplete combustion of fuel in the furnace is judged by high __________ of the flue gases.