Bissoy.com
Doctors Medicines MCQs Q&A

The actual vacuum in a condenser is equal to ___________

The actual vacuum in a condenser is equal to ___________ Correct Answer barometric pressure – actual pressure

The actual vacuum in a condenser is equal to barometric pressure – actual pressure.

Related Questions

A two pass surface condenser is required to handle the exhaust from a turbine developing 15 MW with specific steam consumption of 5 kg/k W h. The quality of exhaust steam is 0.9, the condenser vacuum is 66 cm of mercury while the bar meter reads 76 cm of mercury. The condenser tubes are 28 mm inside diameter, 4 mm thick and water flows through tubes with a speed of 3 m/s and inlet temperature 20 degree Celsius. All the steam is condensed, the condensate is saturated water and temperature of cooling water at exit is 5 degree Celsius less than the condensate temperature. Assuming that overall coefficient of heat transfer is 4 k W/m2 degree, determine the mass of cooling water circulated
The ratio of the actual vacuum to the ideal vacuum in a condenser is called
A steam condenser is transferring 250 k W of thermal energy at a condensing temperature of 65 degree Celsius. The cooling water enters the condenser at 20 degree Celsius with a flow rate of 7500 kg/hr. If overall heat transfer coefficient for the condenser surface is 1250 W/m2 K, what surface area is required to handle this load?
Which one of the following condenser matches to this description-‘This condenser is similar to the spray condenser, with the only difference that the coolant is directed to flow over a series of trays in a column’?
The actual vacuum in a condenser is equal to
In the layout plan for a vacuum distillation unit, operating at 60 mm Hg, supported by a barometric condenser, the appropriate place for the location of vacuum drum for collecting the distillate will be
Which of the following statements about vacuum gauges are correct? Statement 1: Thermal vacuum gauges sense the cooling effect of a heated filament. Statement 2: Thermal vacuum gauges designed to measure high pressures.
Which of the following part vacuum is referred to as a ported vacuum in a vacuum advance type?
Pavan and Sravan are two persons. If Pavan works with his actual efficiency and Sravan twice of his actual efficiency then it takes 25 days to complete the work. But If Pavan works twice of his actual efficiency and Sravan with his normal efficiency then the work is completed in 20 days. How many days would it take if Sravan alone works with his actual efficiency (in Days)?
Adiabatic efficiency is the ___________ of actual work required by condenser to bring to certain temperature and actual work input.