Bissoy.com
Doctors Medicines MCQs Q&A

What is the effect of lack of true spindle rotation in accurate worm and gear rotary table?

What is the effect of lack of true spindle rotation in accurate worm and gear rotary table? Correct Answer Both angular and centre distance error

Lack of true spindle rotation in accurate worm and gear rotary table results in both angular error and centre distance error. Rotary table has the advantage of trouble free operation and good repeatability.

Related Questions

Which of the following option is true about rotary tables? Statement 1: Index is not used with optical rotary table. Statement 2: Accurate worm and gear rotary table can be used with an index plate.
Speed reduction in a gear box is achieved using a worm and worm wheel. The worm wheel has 30 teeth and a pitch diameter of 210 mm. If the pressure angle of the worm is 20o, what is the axial pitch of the worm?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
If one gear is fixed while the other gear has motion of two types i.e. rotary about its own axis and rotation about axis of fixed gear, than the gear train is _____
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
What is worm lead in worm and worm gear?
Which of the following is true for accurate worm and gear rotary tables?
Consider the following statements in case of reverted gear train: 1. The direction of rotation of the first and the last gear is the same. 2. the direction of rotation of the first and the last gear is opposite. 3. The first and the last gears are on the same shaft. 4. The first and the last gears are on separate but co-axial shafts. Which of these statements is/are correct?
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.