Dry Sand Moulds are used for small and medium sized castings.

Dry Sand Moulds are used for small and medium sized castings. Correct Answer False

Dry Sand is nothing baked Green Sand. The moulds are filled with the green sand and then the entire mold is dried in ovens before molten metal is poured They have high strength and permeability. Hence, the dry sand moulds are used for large castings as they are not suitable for small castings.
Bissoy MCQ

Related Questions

Dry sand moulds have high strength than the green sand moulds to form large castings.
Large, medium and small ships are used to bring water. 4 large ships carry as much water as 7 small ships, 3 medium ships carry the same amount of water as 2 large ships and 1 small ship. 15 large, 7 medium and 14 small ships, each made 36 journeys and brought a certain quantity of water. In how many journeys would 12 large, 14 medium and 21 small ships bring the same quantity ?
In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
Sand reclamation is defined for repeatedly using new sand for the making of moulds in production of castings.
Skin dried mould is preferable for large moulds over the dray sand moulds.
Assertion A: Slow sand filters are more efficient in removal of bacteria than rapid sand filters.
Reason R: The sand used in slow sand filters is finer than that in rapid sand filters
Select your answer based on the coding system given below:
Statement I A sampling distribution of mean, prepared on the basis of small sized samples from a population which is not normally distributed, is not normally distributed.
Statement II To test the significance of the difference between means of two small sized samples when the parameter values of the standard deviations are given, Z-test can be applied.
Steel moulds used in the process of moulding for the manufacturing of bricks are less durable than the brick moulds.
In the mechanized foundry, a roller conveyor is used for the transportation of moulds, on which moulds are transferred by rolling.
Tumbling method, for cleaning of sand and unwanted fins from the castings, can be used for thin castings with fragile or overhung segments.