Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

If the rivets in adjacent rows are staggered and the outermost row has only one rivets, the arrangement of the rivets is called
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along B-B.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the tensile strength of rivets along C-C.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². Calculate the pitch of the rivets.
Two plates are joined by double strap butt joints with rivets arrangement as shown in the figure. Width of the plate is 300mm and diameter of rivets 30mm. The thickness of the plates can be taken as 20mm. Allowable stress in tension, shear and compression are 80 N/mm²,60 N/mm² and 160N/mm². If width of plate=80mm and diameter of rivets 10mm, then pitch will be?
If number of rivets subjected to single shear per pitch length is 2 and those subjected to double shear per pitch length are 3, then find the shear resistance of rivets is diameter of rivets is 20mm and permissible shear 60N/mm².
According to I.B.R., the distance between the rows of rivets, for equal number of rivets in more than one row for lap joint or butt joint (chain riveting) shall not be less than
As compared to field rivets, the shop rivets are
When the maximum distance between centres of two adjacent rivets connecting the members subjected to either compression or tension exceed the maximum pitch, then the additional rivets which are not subjected to the calculated stress are used, and are known as 
A riveted joint may fail by 1. tearing of the plate at an edge 2. tearing of the plate across a row of rivets 3. shearing of rivets Which of the above are correct?