Bissoy.com
Doctors Medicines MCQs Q&A

Bevel gears used for connecting intersecting shafts at 900 and having speed ratio 1 : 1 is known as

Bevel gears used for connecting intersecting shafts at 900 and having speed ratio 1 : 1 is known as Correct Answer mitre gears

Bevel gears used for connecting intersecting shafts at 900 and having speed ratio 1 : 1 is known as mitre gears. Bevel gears with basic pressure angle of 200 with long and short addendums for ratios other than 1:1 to avoid undercut pinions and to increase strength are gleason bevel gears.

Related Questions

Consider the following statements: The axis of spiral bevel gear are non-parallel and intersecting. 1) The most common pressure angle for spiral bevel gear is 20° 2) The most common spiral angle for spiral bevel gear is 35. 3) Spirals bevel gears are generally interchangeable. 4) Spirals are noisy and recommended for low speeds of 10 m /s. Which of the above statements are correct?
Statement (I): Two  non-intersecting and non-parallel, i.e., non-coplanar, shafts connected by gears are called skew-bevel gears or spiral gears, and this type of gearing has a line contact the rotation of which about the axes generates the two hyperboloid pitch surfaces. Statement (II): A hyperboloid is a 3D surface formed by revolving a straight line about an axis (not in the same plane), such that every point on the line remains at a constant distance from the axis.
Bevel gears having equal number of teeth and equal pitch angles connect two orthogonally intersecting shafts. This system of gears is known as
When bevel gears having equal teeth connect two shafts whose axes are mutually perpendicular, then the bevel gears are known as 
When bevel gears connect two shafts whose axes intersect at an angle greater than a right angle and one of the bevel gears has a pitch angle of 90°, then they are known as
A pair of bevel gears is mounted on two intersecting shafts who have a shaft angle of 70°. The velocity ratio of the gears is 2. Find the pitch angles.
A pair of bevel gears is mounted on two intersecting shafts who have a shaft angle of 80°. The gear ratio of the gears is 1/3. Find the pitch angles.
Tapered involute gears which can couple intersecting shafts, skew shafts, and parallel shafts are known as
The bevel gears used for connecting non intersecting shafts are
What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.