Bissoy.com
Doctors Medicines MCQs Q&A

In a weston differential pulley block, the number of recesses in the smaller wheel is 9/10 of that of the larger wheel. If the efficiency of the machine is 50%, find the load lifted by an effort of 300N.

In a weston differential pulley block, the number of recesses in the smaller wheel is 9/10 of that of the larger wheel. If the efficiency of the machine is 50%, find the load lifted by an effort of 300N. Correct Answer 3000N

Related Questions

A weston differential pulley block consists of a lower block and upper block. The upper block has two cogged grooves, one of which has a radius of 150 mm and the other a radius of 125 mm. If the efficiency of the machine is 50% calculate the effort required to raise a load of 1.5 kN.
In a wheel and differential axle, the diameter of the effort wheel is 400 mm. The radii of the load axles are 150mm and 100 mm respectively. The diameter of the rope is 10 mm. Find the load which can be lifted by an effort of 100 N, assuming an efficiency of the machine to be 75%.
If the angle of wrap on smaller pulley of diameter 250 mm is 1200 and diameter of larger pulley is twice the diameter of smaller pulley, then the centre distance between the pulleys for an open belt drive is
Consider the following statements regarding milling machine: 1. In the vertical milling machine, it Is possible to machine dovetail recesses. 2. In universal milling machine, the worktable can be swivelled. 3. In rotary milling machine, motion imparted to work is rotary. 4. Planer milling machine is provided with several horizontal and vertical heads. Which of the above statements are correct?
The velocity ratio of a differential pulley block with D and d as the diameters of larger and smaller pulley, is
Three different stones are lifted from the ground level to different heights on different planets as given below: Case 1: A 250 g stone lifted to 10 m on earth. Case 2: A 800 g stone lifted to 2 m on Saturn Case 3: A 1 kg stone lifted to 1 m on Jupiter. Which of the following statements is true? (Given that the acceleration due to gravity on the Earth, the saturn and the Jupiter are 10 m s-2, 15 m s-2 and 25 m s-2 respectively).
In a lifting machine, the effort required to lift loads of 200N and 300N were 50N and 60N respectively. If the velocity ratio of the machine is 20 determine maximum efficiency which can be expected from this machine.
In a lifting machine, the effort required to lift loads of 200N and 300N were 50N and 60N respectively. If the velocity ratio of the machine is 20 determine efficiency to load of 200 N.
In a lifting machine, the effort required to lift loads of 200N and 300N were 50N and 60N respectively. If the velocity ratio of the machine is 20 determine efficiency to load of 300 N.
In a lifting machine, the effort required to lift loads of 200N and 300N were 50N and 60N respectively. If the velocity ratio of the machine is 20 determine effort loss in friction at 200 N.