Bissoy.com
Doctors Medicines MCQs Q&A

A geared system possessed a strain energy if 150kJ, later it was converted into a two-rotor system connected by a shaft. The Strain energy of the equivalent system will be _____

A geared system possessed a strain energy if 150kJ, later it was converted into a two-rotor system connected by a shaft. The Strain energy of the equivalent system will be _____ Correct Answer 150 kJ

If the geared system is converted into an equivalent system of rotors connected by a shaft then the Strain energy of the original and the equivalent system must be same.

Related Questions

A geared system possessed a kinetic energy if 200kJ, later it was converted into a two-rotor system connected by a shaft. The kinetic energy of the equivalent system will be_____
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
A torsional system with discs of moment of inertia $${I_1}$$ and $${I_2}$$ as shown in the below figure, is gear driven such that the ratio of speed of shaft B to shaft A is 'G'. Neglecting the inertia of gears, the equivalent inertia of disc on shaft B at the speed of shaft A is equal to
Theory of Machine mcq question image
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.
Two heavy rotating masses are connected by shafts of lengths $${l_1},\,{l_2}$$  and $${l_3}$$ and the corresponding diameters are d1, d2 and d3. This system is reduced to a torsionally equivalent system having uniform diameter d = d1 of the shaft. The equivalent length of the shaft is
In a mine between upcast shaft and downcast shaft, two airways are connected in parallel and their resistances are 100 and 120 Ns-2m-8 respectively. The resistance of upcast shaft, downcast shaft and the fan drifts are 10, 20, and 5 Ns-2m-8 respectively. The rate of airflow through the split airway having resistance of 100 Ns-2m-8 in m3/s is