Bissoy.com
Doctors Medicines MCQs Q&A

Determine the net radiant heat exchange per m 2 area for two infinite parallel plates held at temperature of 800 K and 500 K. Take emissivity as 0.6 for the hot plate and 0.4 for the cold plate

Determine the net radiant heat exchange per m 2 area for two infinite parallel plates held at temperature of 800 K and 500 K. Take emissivity as 0.6 for the hot plate and 0.4 for the cold plate Correct Answer 6200 W/m2

Q 12 = (F g) 12 A 1 σ b (T 14 – T 24) and (F g) 12 = 0.135. Therefore, Q 12 = 6200 W/m2.

Related Questions

Two parallel square plates, each 4 m2 area, are large compared to a gap of 5 mm separating them. One plate has a temperature of 800 K and surface emissivity of 0.6, while the other has a temperature of 300 K and surface emissivity of 0.9. Find the net energy exchange by radiations between the plates
Consider an enclosure formed by three surfaces having the following values of shape factors, emissivities and temperatures Surface 1 i.e. curved cylindrical has an emissivity 0.75 and temperature 800 K Surface 2 i.e. closing disc has an emissivity 0.8 and temperature 700 K Surface 3 i.e. closing disc has an emissivity 0.8 and temperature 700 K The closing flat discs are 25 mm in diameter and they have interspacing distance equal to 100 mm. If the shape factor between these two identical discs is 0.05, calculate the net rate of radiant heat flow from the curve surface to each of the closing end surface
Which of the following statements are true regarding cold and hot deserts: (a) Hot deserts have high temperature while cold deserts have low temperature. (b) hot deserts are battered by sun and are sandy. Cold deserts have ice and snow covered ground. (c) Hot deserts are red or orange while cold deserts are gray. (d) Hot and cold deserts experience a significant seasonal effect.
A large plane, perfectly insulated on one face and maintained at a fixed temperature T 1 on the bare face, has an emissivity of 0.84 and loses 250 W/m2 when exposed to surroundings at nearly 0 K. The radiant heat loss from another plane of the same size is 125 W/m2 when bare face having emissivity 0.42 and is maintained at temperature T 2 is exposed to the same surroundings. Subsequently these two planes are brought together so that the parallel bare faces lie only 1 cm apart and the heat supply to each is so regulated that their respective temperatures T 1 and T 2 remains unchanged. Determine he net heat flux between the planes
To effect a bond between two metal plates, 2.5 cm and 15 cm thick, heat is uniformly applied through the thinner plate by a radiant heat source. The bonding must be held at 320 K for a short time. When the heat source is adjusted to have a steady value of 43.5 k W/m2, a thermocouple installed on the side of the thinner plate next to source indicates a temperature of 345 K. Calculate the temperature gradient for heat conduction through thinner plate. In the diagram, the upper plate is 2.5 cm thick while the lower is 15 cm thick.
Two large parallel planes with emissivity 0.4 are maintained at different temperatures and exchange heat only by radiation. What percentage change in net radiative heat transfer would occur if two equally large radiation shields with surface emissivity 0.04 are introduced in parallel to the plates?
Two long parallel surfaces each of emissivity 0.7 are maintained at different temperatures and accordingly have radiation heat exchange between them. It is desired to reduce 75% of the radiant heat transfer by inserting thin parallel shields of emissivity 1 on both sides. The number of shields should be
Two long parallel surfaces, each of emissivity 0.7 are at different temperatures and accordingly have radiation exchange between them. It is desired to reduce 75% of this radiant heat transfer by inserting thin parallel shields of equal emissivity 0.7 on both sides. What should be the number of shields?
A parallel-plate capacitor of capacitance C1 is made using two gold plates. Another parallel-plate capacitor of capacitance C2 is made using two aluminium plates with same plate separation, and all the four plates are of same area. If ρg and ρa are respectively the electrical resistivity of gold and aluminium, then which one of the following relations is correct?
A parallel-plate capacitor of capacitance C1is made using two gold plates. Another parallel-plate capacitor of capacitance C2is made using two aluminium plates with same plate separation, and all the four plates are of same area. If gand aPare respectively the electrical resistivities of gold and aluminium, then which one of the following relations is correct?