Related Questions

Three rods, one made of silver (l = 420W/m K), second made of aluminum (k = 210W/m K) and the third made of iron (k = 70W/m K) are coated with a uniform layer of wax all around. The rods are placed vertically in a boiling water bath with 250 mm length of each rod projecting outside. If all the rods are having following dimensions i.e. diameter = 15 mm and length = 300 mm and have identical surface coefficient 12.5W/ m2 K, work out the ratio of lengths up to which wax will melt on each rod
Statements : All rods are bricks. Some bricks are ropes. All ropes are doors.

Conclusions :
I. Some rods are doors.
II. Some doors are bricks.
III. Some rods are not doors.
IV. All doors are ropes.
City High School must put together a debating team consisting of four debaters.There are candidates of equal ability : X,Y and Z who are all seniors; and A,B,C and D who are all juniors..The school requires that there should be two seniors and two juniors in the team.It is also necessary that all of the debaters be able to work with one another. *Debaters Y and A cannot work together. *Debaters Z and C cannot work together. *Debaters A and B cannot work together. which of the following statements must be false? 1.Debaters Y and C are never selected together. 2.Debaters Z and D are never selected together. 3.Debaters Z and D are never selected together.
Sekar started a business investing Rs.25,000 in 1999. In 2000, he invested an additional amount of Rs. 10,000 and Rajeev joined him with an amount of Rs. 35,000. In 2001, Sekar invested another additional amount of Rs.10,000 and Jatin joined them with an amount of Rs.35,000. What will be Rajeev's share in the profit of Rs.1,50,000 earned at the end of 3 years from the start of the business in 1999?
Thin layer of material B (of total amount m) is plated on the end faces of two long rods of material A. These are then joined together on the plated side (see the figure below) and heated to a high temperature. Assuming the diffusion coefficient of B in A is D, the composition profile CB along the rod axis x after a time t is described by
Introduction to Metallurgy mcq question image
Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)
Two rods A and B of the same length and diameter protrude from a surface at 120 degree Celsius and are exposed at air at 25 degree Celsius. The temperatures measured at the end of the rods are 50 degree Celsius and 75 degree Celsius. If thermal conductivity of material A is 20W/ m K, calculate it for B
Working together B and C take 50% more number of days than A, B and C together take and A and B working together, take $$\frac{8}{3}$$ more number of days than A, B and C take together. If A, B and C all have worked together till the completion of the work and B has received Rs. 120 out of total earnings of Rs. 450, then in how many days did A, B and C together complete the whole work?
three meauring rods are 64 cm, 80 cm and 96 cm in length, What is the least length of cloth that can be measured exact number of times using any one of these rods ?
Three measuring rods are 64 cm, 80 cm and 96 cm in length. what is the least length of cloth that can be measured exact number of times using any one of these rods?