Bissoy.com
Doctors Medicines MCQs Q&A

A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Determine the size of bolts using maximum shear stress theory.

A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Determine the size of bolts using maximum shear stress theory. Correct Answer 9mm

Considerig bolt B as a criterion, τ(max)= √(σ/2)²+ τ² where σ=7920.8/A and τ=20000/4A or 4 x 6378.5/πd²=100.

Related Questions

A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the radius of Mohr circle which can be made from the shear stress and tensile stress acting on bolts.(Consider bolt under max stress and area of bolt is A)
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Determine the size of bolts using maximum principal stress theory.
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the effective tensile force acting in the two bolts.
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Find the ratio of the effective tensile load to which the two bolts are subjected.
A wall bracket is attached to the wall by means of 2 identical bolts, one at A and one at B. The force of 20kN acts at a distance of 400mm. Bolt A lies at a distance of 50mm from axis of tilt and bolt B 500mm. Allowable shear stress in the bolts is 100N/mm² and tensile is 40N/mm². Which bolt is used a criterion for designing?
The structure shown is subjected to an eccentric force P=5kN and eccentricity=500mm. The horizontal distance between two bolts is 200mm and vertical distance between bolts is 150mm. The yield strength of bolts is 400N/mm² and factor of safety is 3. Determine the resultant shear force on the bolt lying left and above the CG.
The structure shown is subjected to an eccentric force P=5kN and eccentricity=500mm. The horizontal distance between two bolts is 200mm and vertical distance between bolts is 150mm. The yield strength of bolts is 400N/mm² and factor of safety is 3. Determine the resultant shear force on the bolt lying right and above the CG.
A round flange bearing is fastened to the machine frame by means of 4 cap screws. The angle made by central axis of bolt 2 and horizontal is θ. Also the radii of flange and pitch circle are a & b respectively. Given: Sum of squares of distance of bolts from axis of tilt is 2a² +b². Which bolt is under maximum stress if dowel pins are used to relieve cap screws from shear stress?
Given data for bracket is P=20kN, e=100mm, S(yt)=400N/mm², FS=3. If distance between the bolts from the axis of tilting is 125mm and 25mm, then find the effective tensile force acting on the bolts lying at 125mm from tilting axis.
Given data for bracket is P=20kN, e=100mm, S(yt)=400N/mm², FS=3. If distance between the bolts from the axis of tilting is 125mm and 25mm, then find the effective tensile force acting on the bolts lying at 25mm from tilting axis.