Face milled gear sets are manufactured in_____

Face milled gear sets are manufactured in_____ Correct Answer Single-indexing—one slot at a time

The milling machine can cut only one tooth/slot at a time. After cutting one tooth, indexing crank is rotated by calculated amount thus taking the workpiece to the proper position for cutting the next tooth.
Bissoy MCQ

Related Questions

A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the tangential gear tooth force. Module of the gear is 5mm.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.
Each of the six faces of a cube is numbered by one of the six digits from 1 to 6. This cube is shown in its four different positions in the figures 1, 2, 3 and 4.
Cubes and Dice mcq question image
Consider the following statements:
I. Figures 2 and 3 are sufficient to know as to which face is opposite to the face numbered 6.
II. Figures 2 and 3 are sufficient to know as to which face is opposite to the face numbered 4.
III. Figures 1 and 4 are sufficient to know as to which face is opposite to the face numbered 3.
Which of the statements given above are correct?
A manufacturer of TV wants to make a profit of Tk. 300,000 on sale of 200 TV sets. It costs Tk. 10,000 each to make the first 100 TV sets and Tk. 7,500 each to make TV sets after the first 100 sets. What should be the selling price of each TV sets in Taka?
Directions : In each of the following questions a statement is given, followed by two conclusions. Give answer :

Statement : Of all the radio sets manufactured in India, the 'X' brand has the largest sale.

Assumptions :
I. The sale of all the radio sets manufactured in India is known.
II. The manufacturing of no other radio set in India is as large as 'X' brand radio.
An unbalanced dice (with 6 faces, numbered from 1 to 6) is thrown. The probability that the face value is odd is 90% of the probability that the face value is even. The probability of getting any even numbered face is the same.
If the probability that the face is even given that it is greater than 3 is 0.75, which one of the following options is closest to the probability that the face value exceeds 3?
Which gear train contains only one gear in a single shaft and the driven gear does not revolve driven gear around it?