Bissoy.com
Doctors Medicines MCQs Q&A

Which gear train contains only one gear in a single shaft and the driven gear does not revolve driven gear around it?

Which gear train contains only one gear in a single shaft and the driven gear does not revolve driven gear around it? Correct Answer Simple gear train

Simple gear train contains only one gear in a single shaft and the driven gear does not revolve driven gear around it. It is the mist simple and most commonly used gear train. The shafts of driver and driven gear are also parallel to each other.

Related Questions

There is only one rail track between stations A and B on a railway line. One hour after the northbound superfast train N leaves station A for station B, the southbound passenger train S reaches station A from station B. The speed of superfast train is twice that of express train E, while the speed of passenger train S is half of that of train E. On some one day train N leaves from station A to station B 20 minutes late than its usual schedule. Both Train N and Train S have increased their speed to maintain the schedule as per the table. If the superfast train doubles its speed, then what should be the ratio (approximately) of the speed of the passenger train to the speed of the superfast train so that the passenger train reaches the station on that day at the exact scheduled time.
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the driven shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the maximum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
A double universal joint is used to connect two shafts in the same plane. The intermediate shaft is inclined at an angle of 20° to the driving shaft as well as the driven shaft. Find the minimum speed of the intermediate shaft if the driving shaft has a constant speed of 500 r.p.m.
Each question presents a situation and asks you to make a judgement regarding that particular circumstance. Choose an answer based on given information. Three friends are waiting for a train on the railway station. Suddenly, a train passes by and each of them tries to remember the train number of the train written on each of the coaches. The train number was a 5-digit number. All must agree in order to confirm the digit of train number. 1. All three agrees that all the digits of the train number was different. 2. All three agrees that the difference of 3rd and 5th digit from left is equal to the 4th digit from the left. 3. All three agrees that the 1st digit was 1. 4. All three agrees that the 2nd digit was an even prime number. Which of the following would be most likely the train number?
A torsional system with discs of moment of inertia $${I_1}$$ and $${I_2}$$ as shown in the below figure, is gear driven such that the ratio of speed of shaft B to shaft A is 'G'. Neglecting the inertia of gears, the equivalent inertia of disc on shaft B at the speed of shaft A is equal to
Theory of Machine mcq question image
Seven people A, B, C, D, E, F and G live on separate floors of a 7-floor building. Ground floor is numbered 1, first floor is numbered. 2 and so on until the topmost floor is numbered 7. Each one of these having a different cars-Cadillac, Ambassador, Fiat, Maruti, Mercedes, Bedford and Fargo but not necessarily in the same order. Only three people live above the floor on which A lives. Only one person lives between A and the one having a car Cadillac. F lives immediately below the one having a car Bedford. The one having a car Bedford lives on an even-numbered floor. Only three people live between the ones having a car Cadillac and Maruti. E lives immediately above C. E is not having a car Maruti. Only two people live between B and the one having a car Fargo. The one having a car Fargo lives below the floor on which B lives. The one having a car Fiat does not live immediately above D or immediately below B. D does not live immediately above or immediately below A. G does not have a car Ambassador. Question : How many people live between the floors on which D and the one having a car Bedford ?