Bissoy.com
Doctors Medicines MCQs Q&A

In the process of gear cutting by hobbing, the angle between the hob’s spindle axis and the workpiece’s spindle axis is fixed.

In the process of gear cutting by hobbing, the angle between the hob’s spindle axis and the workpiece’s spindle axis is fixed. Correct Answer False

The angle between the hob’s spindle axis and the worpiece’s spindle axis varies depending upon the type of product being manufactured.

Related Questions

For helical gears, the angle between hob’s spindle axis and workpiece’s spindle axis must be _____ as the helix angle of the helical gear.
A spur gear of 40 teeth is machined in a gear hobbing machine using a double start hob cutter. The speed ratio between the hob and the blank is
For spur gear manufacturing, angle between the hob’s spindle axis and the workpiece’s spindle axis should be equal to____
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
If one gear is fixed while the other gear has motion of two types i.e. rotary about its own axis and rotation about axis of fixed gear, than the gear train is _____
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the shaft angle for opposite hand of helix if helix angle of two gears are 20⁰ and 17⁰.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.
Which of the following machine is based upon the principle that the rotating edge of the tool exerts a large force on the workpiece and holes are being created in the workpiece? The material is removed from the workpiece by the shearing and extrusion process.