Bissoy.com
Doctors Medicines MCQs Q&A

Distance between the points of contact of two mating teeth from the beginning of engagement to the end of engagement is known as

Distance between the points of contact of two mating teeth from the beginning of engagement to the end of engagement is known as Correct Answer Path of contact

Path of contact is the distance between the points of contact of two mating teeth from the beginning of engagement to the end of engagement.

Related Questions

Which of the following statements are correct for mating gears with involute profiles? 1. The pressure angle, from the start of the engagement to the end of the engagement, remains constant. 2. The pressure angle is maximum at the beginning of the engagement, reduces to zero at pitch point, starts decreasing and again becomes maximum at the end of the engagement. 3. The face and flank of the teeth are generated by a single curve and the normal to this curve at any point is tangent to the base circle of the gear. 4. The centre distance for a pair of mating gears can be varied within limits without altering the velocity ratio. Select the correct answer using the code given below.
Which of the following statements are correct for mating gears with involute profiles? (i) The pressure angle, from the start of the engagement to the end of the engagement, remains constant. (ii) The pressure angle is maximum at the beginning of the engagement, reduces to zero at pitch point, starts decreasing and again becomes maximum at the end of the engagement. (iii) The face and flank of the teeth are generated by a single curve and the normal to this curve at any point is tangent to the base circle of the gear. (iv) The centre distance for a pair of mating gears can be varied within limits without altering the velocity ratio. Select the correct answer using the code given below.
The locus of the point of contact on two mating teeth from beginning of engagement to end of engagement is known as the _______________
Circumferential distance between points from the beginning to the end of engagement of two mating gear on pitch circle is known as
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
Mohan traveled five cities (A, B, C, D and E) starting from home by a car which has a mileage such that the car can travel 10 km in 1 liter petrol. Distance between city A and B is twice the distance between home to city A. Distance between city B and C is thrice the distance between home to city A. Distance between city C and D is 100. Distance between city D and E is 1.5 times than the distance between B and C. Average distance traveled by Mohan was 41 km between five cities. Find how much petrol was needed by Mohan to travel from city B to D.
Two involute gears in a mesh have path of approach = 29.83 mm and path of recess = 21.09 mm. The larger gear has 40 teeth and the pinion has 12 teeth. Find the ratio of the sliding to rolling velocity at the: i) beginning of contact ii) end of contact iii) pitch point r = 72 mm
Two circular dials of exactly the same size are mounted on a wall side by side in such a way that their perimeters touch at one point. Dial 1, which is on the left , spins clockwise around its center , and dial 2 , which is on the right spins counter clockwise around its center . (Assume that there is no friction at the point of contact between the dials.) Each dial is marked on its perimeter at three points that are at equale distances around the points arked ondial 1 are N, O, and P and the points marked on dial 2 are X, Y, and Z. If points O and Z are just meeting at the point of contact between the dials , and if dial 1 spins at the same speed as dial 2, what is the smallest number of revolutions of each dial that will bring O and Z together again?
A straight line segment is 36 cm long. Points are to be marked on the line from both endpoints. From each end, the first point is at a distance of 1 cm from the end, the second point is at a distance of 2 cm from the first point and the third point is at a distance of 3 cm from the second point and so on. If the points on the ends are not counted and the common points are counted as one, what is the number of points?
A certain dentist specializes in implanting gold and silver teeth in his patients mouths .He charges $ 650 for a gold tooth an $ 325. for a silver tooth. If his told fees for implanting gold and silver teeth last week were $ 15, 925 in total and he implanted five more gold teeth that silver teeth, how many teeth in total did he implant over the week?