Bissoy.com
Doctors Medicines MCQs Q&A

When Di-Df>0.025 mm ______ correction is applied to the equation for computing rebound deflection.

When Di-Df>0.025 mm ______ correction is applied to the equation for computing rebound deflection. Correct Answer Leg

The equation to find rebound deflection is D=0.02(Do-Df) mm. This is applicable when Di-Df<0.025 mm and when Di-Df>0.025 mm, there is a need to modify the equation by introducing terms for leg correction. The equation hence becomes D=0.02(Do-Df)+0.02k(Di-Df) mm.

Related Questions

BBD studies were carried out on a highway pavement at a temperature of 40°C. The rebound deflection was found to be 1.41 mm. what would be the corrected rebound deflection?
What would be the corrected rebound deflection if the rebound deflection obtained from BBD studies is 1.33 mm? The test was conducted at 35°C on sandy soil with 5% moisture content. The annual rainfall of the area is obtained as 1050 mm.
What would be the corrected rebound deflection if the rebound deflection obtained from BBD studies is 1.38 mm? The test was conducted at 30°C on a clayey soil having a plasticity of 10% and a moisture content of 4.5%. The annual rainfall of the area is obtained as 1450 mm.
What is the equation to find the rebound deflection if the relationship between intermediate deflection reading Di and the final deflection reading Df is Di-Df<0.025 mm?
Consider the following statements in connection with deflection-type and null-type instruments: 1. Null-type instruments are more accurate than the deflection-type ones. 2. Null-type of instrument can be highly sensitive compared to a deflection-type instrument. 3. Under dynamic conditions, null-type instruments are less preferred to deflection-type instruments. 4. Response is faster in null-type instruments as compared to deflection-type instruments. Which of the above statements are correct?
Which are the corrections applied to the hydrometer readings? (i) Meniscus correction (ii) Temperature correction (iii) Density correction (iv) Dispersing agent correction 
______ deflection is obtained as the sum of mean rebound deflection and standard deviation.
Consider the following statements for deflection and null type instruments: 1. Deflection type of instruments are more accurate than null type of instruments. 2. Deflection type of instruments can be highly sensitive as compared with the null type of instruments. 3. Null type of instruments are more suitable for measurements under dynamic conditions than deflection type of instruments. Which of the above statements are not correct?
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
What will be seen on the screen of CRO, when a sinusoidal voltage signal is applied to the vertical deflection plate of this CRO with no simultaneous signal applied to the horizontal deflection plate?