Bissoy.com
Doctors Medicines MCQs Q&A

The cracking in the interior of the slab is mainly due to the structural inadequacies.

The cracking in the interior of the slab is mainly due to the structural inadequacies. Correct Answer False

The changes in the temperature is the main reason for the formation of cracks in the interior region of the pavement. The structural inadequacies result in the formation of cracks in the vicinity of the joints or the corners.

Related Questions

In counterfort type retaining walls
i) the vertical slab is designed as a continuous slab
ii) the heel slab is designed as a continuous slab
iii) the vertical slab is designed as a cantilever
iv) the heel slab is designed as a cantilever
The correct answer is
Which of the following statements are correct regarding Westergard’s concept for temperature stresses? 1. During the day, the top of the pavement slab gets heated under the sunlight when the bottom of the slab becomes hot 2. During summer season as the mean temperature of the slab increases, the concrete pavement expands towards the expansion joints 3. Due to frictional force at the interface, compressive stress is developed at the bottom of the slab as it tends to expand.
In counterfort type retaining wallsi) the vertical slab is designed as a continuous slabii) the heel slab is designed as a continuous slabiii) the vertical slab is designed as a cantileveriv) the heel slab is designed as a cantileverThe correct answer is
A plane slab of thickness 60 cm is made of a material of thermal conductivity k = 17.45 W/m K. Let us assume that one side of the slab absorbs a net amount of radiant energy at the rate q = 530.5 watt/m2. If the other face of the slab is at a constant temperature t2 = 38 degree Celsius. Comment on the temperature with respect to the slab?
In general, the failures in the rigid pavement occur due to the structural inadequacies in the pavement.
The number of sides of polygon A is 6 more than the number of sides of polygon B. Interior angle of polygon A is 10° more than the interior angle of polygon B. Find the interior angle of polygon whose side is equal to sum of number of sides of polygon A and B.
The annual range of temperature in the interior of the continents is high as compared to coastal areas. What is/are the reason/reasons? 1. Thermal difference between land and water 2. Variation in altitude between continents and oceans 3. Presence of strong winds in the interior 4. Heavy rains in the interior as compared to coasts Select the correct answer using the codes given below.
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খন্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডতির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
কাগজের ভার হিসাবে ব্যবহৃত একটি পুরু কাচ (প্রতিসরাঙ্ক 1.5) খণ্ডের উপর থেকে খাড়া নীচের দিকে তাকালে কাগজের উপর একটি দাগ কাচের উপর প্রান্ত থেকে 6 cm নীচে দেখা যায়। কাচ খন্ডটির পুরুত্ব কত? (When you look downward from the top of a thick glass (refractive index 1.5) slab used as a paper weight, a mark on the paper is seen 6 cm below from the top of the slab. What is the thickness of the glass slab?)
Consider a slab of thickness δ with one side (x = 0) insulated and other side (x = δ) maintained at constant temperature. The rate of uniform heat generation within the slab is q g W/m3. Presuming that the heat conduction is in steady state and one dimensional along x direction, the maximum temperature in the slab would occur at x equal