Bissoy.com
Doctors Medicines MCQs Q&A

The distribution curves of three materials A, B and C are plotted and their balancing lines are also obtained. According to Rothfutch’s method, ______ ends of balancing lines of ______ and ______ are to be connected.

The distribution curves of three materials A, B and C are plotted and their balancing lines are also obtained. According to Rothfutch’s method, ______ ends of balancing lines of ______ and ______ are to be connected. Correct Answer Opposite, A&B, B&C

The opposite ends of balancing lines of materials A and B and materials B and C are to be connected as per the Rothfutch method. The intersection of these lines with the desired gradation curve will give the proportion of each material to be used.

Related Questions

Indifference curves relating to supply of labour have a number of properties some of which are mentioned below
1. Indifference curves are downward slopping
2. Indifference curves are upward slopping
3. Higher indifference curves indicate lower levels of utility
4. Higher indifference curves indicate higher levels of utility
5. Indifference curves do not intersect
6. Indifference curves intersect
7. Indifference curves are concave to the origin
8. Indifference curves are convex to the origin
Which among the following properties are not true?
Consider the following statements.
1. Magnetic lines of force are closed curves while electric lines are not.
2. Electric lines of force are closed curves while magnetic lines are not.
3. Both electric and magnetic lines of force are closed curves.
Which of statement(s) given above is/are correct?
What is represented in the Y-axis of the distribution curve plotted for Rothfutch’s method?
Shweta has connected a cell with a bulb. The bulb didn't glow. What could be the reasons? A. Bulb was connected by the positive terminal from both ends. B. One end of the bulb was connected with a positive terminal and another end was connected with a negative terminal.  C. Bulb was connected by the negative terminal from both ends D. Bulb was fuse.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
The statement concern psychrometric chart. 1. Constant relative humidity lines are uphill straight lines to the right 2. Constant wet bulb temperature lines are downhill straight lines to the right. 3. Constant specific volume lines are downhill straight lines to the right. 4. Constant enthalpy lines are coincident with constant wet bulb temperature lines. Which of the statements are correct?
The following coding system shows the letter codes for numbers. Excluding the exceptions mentioned below, the digits in the question are to be transformed into letter codes as follows: Digit 0 1 2 3 4 5 6 7 8 9 Letter Code A B C D E F G H I J Exceptions: i. If a number begins with a nonzero even digit, that digit should be coded as N. ii. If a number begins with a nonzero odd digit, that digit should be coded as P. iii. If a number begins and also ends with non-zero even digits, those two digits at the extreme ends should be coded as Q. iv. If a number begins and also ends with nonzero odd digits, those two digits at the extreme ends should be coded as W. v. If a number's middle digit is a multiple of 2 that digit should be coded as Z. Barring these exceptions, the other digits should be codified as per the above-mentioned letter codes. Find the appropriate code for the following number-group 3214067
Consider the following statements regarding synthetic varieties
1. Parental materials are always inbred lines.
2. Open pollinated materials are also used as parental lines.
3. There is no limit on the number of parental lines used.
4. Parental lines are always tested for their combining ability.
Which of the statements given above is/are correct?
(I) For constant power of an isolated alternator, V-curves can be obtained. (II) For constant power of an alternator connected to IBB, V-curves can be obtained
(I)For constant power of an isolated alternator, V-curves can be obtained. (II)For constant power of an alternator connected to IBB, V-curves can be obtained.