To remove 1% primary sludge which of the following size of mesh of a cyclone gritter is used?

To remove 1% primary sludge which of the following size of mesh of a cyclone gritter is used? Correct Answer 150

To remove the 1% primary sludge usually a 150 sized mesh of the cyclone degritter is used. In these cyclone degritters the sludge is fed tangentially. This is the most effective way to degrit sludge.
Bissoy MCQ

Related Questions

To remove 2% primary sludge which of the following size of mesh of a cyclone gritter is used?
To remove 3% primary sludge which of the following size of mesh of a cyclone gritter is used?
Higher is the mesh number, smaller will be the aperture size of the screen. It means that the aperture size of a 200 mesh screen will be smaller than that of 20 mesh screen. This is valid for
The cyclone gritter removes the grit particles based on which of the below mentioned phenomenon?
I1 is the current flowing in the first mesh. I2 is the current flowing in the second mesh and I3 is the current flowing in the top mesh. If all three currents are flowing in the clockwise direction, find the value of I1, I2 and I3.
The moisture content of sludge is reduced from 90% to 80% in a sludge digestion tank. The percentage decrease in the volume of sludge, is
Which of the following is the efficiency range with which a high-efficiency cyclone captures a particle size of 15 microns? (Cyclone has generalised design)
Which of the following statements are true with regards to the selection of a sample size? (i) The sample size (n) may be a fixed percentage of lot size (N). (ii) The sample size (n) may be kept constant irrespective of lot size (N). (iii) Sample size (n) can be selected at the personal whim of the inspector.
Read the passage carefully and choose the best answer to each question out of the four alternatives.
Eight north Indian Ocean countries, namely, Bangladesh, India, the Maldives, Myanmar, Oman, Pakistan, Sri Lanka and Thailand, were asked to contribute names so that a combined list could be compiled. Each country gave eight names and a combined list of 64 names was prepared. This list is currently in use, and all cyclones arising in the north Indian Ocean are named from this list, with one name from each country being used in turn. Almost 38 or 39 names from the list have been used up, but since many cyclones dissipate long before they hit land, their names rarely figure in the papers or other media. The names that people do know about, and remember are, naturally, those that were most destructive ones, or very recent. Aila, in 2009 is remembered with a shudder for the enormous destruction it caused in West Bengal and Bangladesh; Phaillin, also for the damage it caused when it hit the Odisha coast in 2013. Two harmless cyclones, which also might remain in peoples memory, are the more recent ones of 2014 — Hudhud, which threatened the east coast of India and Nilofar, which was expected to, but did not, devastate the western coast. The names in the cyclone list are usually words one associates with storms; words which mean water or wind or lightning in various national languages. Sometimes they are names of other things — birds or flowers or precious stones. The name Aila, contributed by the Maldives means fire, the name Phaillin from Thailand means sapphire, the name Hudhud from Oman is the name of a bird, probably the hoopoe, and the name Nilofar, given by Pakistan, is the Urdu name of the lotus or water lily. The eight names suggested by India, and which are in the list of 64, are Agni, Akaash, Bijli, Jal, Leher, Megh, Sagar and Vayu, meaning in that order, fire, sky, lightning, water, wave, cloud, sea and wind. Five of these names (that is, up to Leher) have been used so far.
Which country did not contribute to the list of the cyclone names?
Read the passage carefully and choose the best answer to each question out of the four alternatives.
Eight north Indian Ocean countries, namely, Bangladesh, India, the Maldives, Myanmar, Oman, Pakistan, Sri Lanka and Thailand, were asked to contribute names so that a combined list could be compiled. Each country gave eight names and a combined list of 64 names was prepared. This list is currently in use, and all cyclones arising in the north Indian Ocean are named from this list, with one name from each country being used in turn. Almost 38 or 39 names from the list have been used up, but since many cyclones dissipate long before they hit land, their names rarely figure in the papers or other media. The names that people do know about, and remember are, naturally, those that were most destructive ones, or very recent. Aila, in 2009 is remembered with a shudder for the enormous destruction it caused in West Bengal and Bangladesh; Phaillin, also for the damage it caused when it hit the Odisha coast in 2013. Two harmless cyclones, which also might remain in peoples memory, are the more recent ones of 2014 — Hudhud, which threatened the east coast of India and Nilofar, which was expected to, but did not, devastate the western coast. The names in the cyclone list are usually words one associates with storms; words which mean water or wind or lightning in various national languages. Sometimes they are names of other things — birds or flowers or precious stones. The name Aila, contributed by the Maldives means fire, the name Phaillin from Thailand means sapphire, the name Hudhud from Oman is the name of a bird, probably the hoopoe, and the name Nilofar, given by Pakistan, is the Urdu name of the lotus or water lily. The eight names suggested by India, and which are in the list of 64, are Agni, Akaash, Bijli, Jal, Leher, Megh, Sagar and Vayu, meaning in that order, fire, sky, lightning, water, wave, cloud, sea and wind. Five of these names (that is, up to Leher) have been used so far.
For the next cyclone if it is the turn of an Indian name to be chosen, then what will be that name?