The cyclone gritter removes the grit particles based on which of the below mentioned phenomenon?

The cyclone gritter removes the grit particles based on which of the below mentioned phenomenon? Correct Answer Centrifugal force

The cyclone gritter removes grit particles based on centrifugal force. The heavier particles move to the outside of the cylinder section. These are then discharged through the conical section.
Bissoy MCQ

Related Questions

To remove 1% primary sludge which of the following size of mesh of a cyclone gritter is used?
To remove 2% primary sludge which of the following size of mesh of a cyclone gritter is used?
To remove 3% primary sludge which of the following size of mesh of a cyclone gritter is used?
Which of these is not a grit removal equipment installed in the aerated grit chamber?
First coat of bituminous painting shall be with stone ballast no.3 and stone grit of 20 mm gauge at 220 kg of asphalt and 1.35 cu m of stone grit per 100 sq. m.
What is the amount of grit quantities captured by the aerated grit chamber?
If the grit in grit chambers is 4.5 million litres per day, its cleaning is done
The grit and silt of the grit chambers, may not be used for
'Disasters we live with' is a story based on a cyclone. The cyclone took place in Bangladesh in-
A system of four particles is in X-Y plane of these two particles of masses m are located at (1, 1) and (-1, 1). The remaining two particles each of mass 2m are located at (1, 1) and (-1, -1). The xy component of moment of inertia tensor of the system of particles is