In general, which letter is considered for Hard Disk Drive?

In general, which letter is considered for Hard Disk Drive? Correct Answer C

কম্পিউটারের অপারেটিং সিস্টেম Default হিসেবে C ড্রাইভে থাকে। তবে ব্যবহারকারীর ইচ্ছানুযায়ী অন্য ড্রাইভেও অপারেটিং সিস্টেম রাখা যায়।
Bissoy MCQ

Related Questions

You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
The disk system consists of which of the following? i. Disk ii. Disk drive iii. Disk controller
You are the administrator of Windows 2000 Server computer. Your computer has a span volume that consists of areas on three physical hard disks on the server. The three disks support hot swapping. You regularly backup the span volume by using windows backup. One of the disk fail, you replace the disk with a new un-partitioned disk. You want to recover the span volume and disk data as soon as possible. What should you do?
While working with MS-DOS, which command is used to compare the disk in drive A with the disk in drive B, specifying to compare only first side of each disk, and only the first 8 sectors of each track?
Hard disk এর পিছনের জাম্পার সেটিং ঠিক না থাকলে যে সমস্যা হয় -i. সফটওয়্যার install করা যায় নাii. Boot disk failureiii. Hard disk not found দেখায়নিচের কোনটি সঠিক?
In general, which letter is considered for Hard Disk Drive ?
In general , which letter is considered for Hard Disk Drive?
A solid cast iron disk of mass 1000kg is rotating at 350rpm. Diameter of the disk is 1m and time taken to come to stop the disk by brake is 1.6sec.Square of radius of gyration is 0.2. Calculate the angle through which disk rotated during braking period.
You install your boot volume on volume C on your Windows 2000 Server computer. You mirror volume C on dynamic Disk 1. Two years later, during routine server maintenance, you open Disk Management and find that the status of volume C is Failed Redundancy. The status of Disk 1 is Missing. You attempt to reactivate Disk 1, but the status of volume C does not return to Healthy. What should you do next?
Your Windows 2000 Server computer contains a stripe set with parity on a four-disk array. You convert the stripe set with parity to a dynamic RAID-5 volume. Six months later, users report that disk access on the server is slower than it had been on the previous day, You use Disk Management and discover that the status of the third disk in the array is Missing. You want to recover the failed RAID-5 volume. What should you do first?