Bissoy.com
Doctors Medicines MCQs Q&A

Find the value of the multiplier constant if the length of the arm is given as 45.78 m and diameter as 2.54 m.

Find the value of the multiplier constant if the length of the arm is given as 45.78 m and diameter as 2.54 m. Correct Answer 364.86 sq. m

The value of multiplier constant can be given as M = L * circumference Circumference = π * D = π *2.54 = 7.97 m. On substitution, we get M = 45.78 * 7.97 = 364.86 sq. m.

Related Questions

Which two statements describe the IP address 10.16.3.65/23?
1. The subnet address is 10.16.3.0 255.255.254.0.
2. The lowest host address in the subnet is 10.16.2.1 255.255.254.0.
3. The last valid host address in the subnet is 10.16.2.254 255.255.254.0.
4. The broadcast address of the subnet is 10.16.3.255 255.255.254.0.
Consider routing table of an organization’s router shown below: Subnet Number  Subnet Mask Next Hop 12.20.164.0 255.255.252.0 R1 12.20.170.0 255.255.254.0 R2 12.20.168.0  255.255.254.0  Interface 0 12.20.166.0 255.255.254.0 Interface 1  default   R3 Which of the following prefixes in CIDR notation can be collectively used to correctly aggregate all of the subnets in the routing table?
Select the phrase/ connector from the given three alternatives, which can be used to form a single coherent sentence from the sentences given below, implying the same meaning. I broke my arm during the game. I managed to score a goal. I. Even though I broke my arm during the game II. My broken arm during the game Ill. Having managed to break my arm during the game
The resultant of the following three couples 20 kg force, 0.5 m arm, +ve sense 30 kg force, 1 m arm, -ve sense 40 kg force, 0.25 m arm, +ve sense having arm of 0.5 m will be
A uniform disc of diameter 300 mm and of mass 5 kg is mounted on one end of an arm of length 600 mm. The other end of the arm is free to rotate in a universal bearing. If the disc rotates about the arm with a speed of 300 r.p.m. clockwise, looking from the front, with what speed will it precess about the vertical axis?
A right angled bell-crank is designed to raise a load of 5kN at short arm whose length is 100mm. Also longer arm is of length 500mm. If permissible bearing pressure on pin is 10N/mm² and diameter of the 20mm, find the length of the pin.
A right angled bell-crank is designed to raise a load of 5kN at short arm whose length is 100mm. Also longer arm is of length 500mm. If permissible bearing pressure on pin is 10N/mm² and diameter of the 20mm, find the shear stress in the pin.
An arm of a teapot is completely filled with tea (density=ρ) If the arm has a length of l and is inclined at 30o to the horizontal, what will be the pressure difference between the two points, C at the mouth and D at the base of the arm?
Statements: 1. Sofa, park bench, arm chair, wing chair, deck chair, stool and wood chair are placed in a straight line facing north. 2. Arm chair is third to the left of wing chair which is second to the left of deck chair. 3. Deck chair is at extreme right end and stool is placed somewhere between arm chair and wing chair. 4. Third to the right of stool is wood chair. 5. Sofa is not at any end place. Conclusions: 1. Stool is at fifth place from the right end. 2. Sofa is at the middle place of the row. 3. Wing chair is at fifth place from the left end.
Consider the following statements; 1) In a reinforced concrete member subjected to flexure, the externally applied moment is resisted by an internal couple formed by steel and concrete and their magnitudes vary with the applied moment, while the lever arm of the internal couple remains constant 2) In a prestressed concrete. Member, the external moment is resisted by an internal couple, but it is the lever arm that changes with the loading conditions and the stress in steel remain practically constant Which of the above statements is/are correct?