Bissoy.com
Doctors Medicines MCQs Q&A

The length of the chain is measured from the outside of one handle to the ___________ of the other handle.

The length of the chain is measured from the outside of one handle to the ___________ of the other handle. Correct Answer Outside

Length of chain is the end to end distance of complete chain. Chain length is the sum of lengths of all links.

Related Questions

The length of a survey line was measured with a 20 m chain and was found to be equal to 1200 m. If the length again measured with 25 m chain it is 1212 m. On comparing the 20 m chain with the test gauge, it was found to be 1 decimeter too long. Find the actual length of 25 m chain used.
The handle of a saucepan, 30 cm long and 2 cm in diameter, is subjected to 100 degree Celsius temperature during a certain cooking operation. The average unit surface conductance over the handle surface is 7.35 W/m2 degree in the kitchen air at 24 degree Celsius. The cook is likely to grasp the last 10 cm of the handle and hence the temperature in this region should not exceed 38 degree Celsius. What should be the thermal conductivity of the handle material to accomplish it? The handle may be treated as a fin insulated at the tip
Two sides of a rectangle were measured. One of the sides (length) was measured 10% more than its actual length and the other side (width) was measured 5% less than its actual length. The percentage error in measure obtained for the area of the rectangle is :
In the following question below are given some statements followed by some conclusions base on those statements. Taking the given statements to be true even if they seem to be at variance from commonly known facts. Read all the conclusions and then decide which of the given conclusion logically follows the given statements. Statements: I. No cycle is handle. II. Some handle are tyre. Conclusions: I. No tyre is cycle. II. Some tyre are handle. III. Some cycle are handle.
A uniform chain of length 2m is kept on a table such that a length of 60cm hangs freely from the edge of the table. The total mass of the chain is 4kg. What is the work done in pulling the entire chain on the table?
The length of a line measured by means of a 20 m chain was found to be 610.2 m known to be 612.0 m. What was the actual length of chain?
The length of a line measured with a 20 m chain was found to be 250 m. Calculate the true length of the line if the chain was 10 cm too long.
If L is true length of chain and L’ is incorrect length of the chain the correction to area A is _________ (Where ∆L/L = e, e is small and A’ is measured are
If L is true length of chain and L’ is incorrect length of the chain the correction to Volume V is _______ (Where ∆L/L = e, e is small and V’ is measured are
The length of the line measured with a 30m chain was found to be 450m. Calculate the true length of the line if the chain was 0.15 in too long.