Bissoy.com
Doctors Medicines MCQs Q&A

What is the stiff bearing length?

What is the stiff bearing length? Correct Answer length which cannot deform appreciably in bending

The stiff bearing length of any element b1 is that length which cannot deform appreciably in bending. To determine b1, the dispersion of load through a steel bearing element should be taken as 45˚ through solid material, such as bearing plates, flange plates, etc.

Related Questions

Which of the following are the functions of lubrication in a bearing unit ? 1. To protect the bearing components from corrosion. 2. To absorb heat from the bearing unit. 3. To carry heat away from the bearing unit. Select the correct answer using the code given below
Consider the following two statements regarding Bearing stiffeners provided at the location of a concentrated load: 1. Bearing stiffeners have to resist bearing and buckling loads. 2. Bearing area and the area resisting buckling load are the same. Which of the above statements is/are correct ?
A rotor which is balanced statically but not dynamically is supported on two bearings L apart and at high speed of the rotor, reaction on the left bearing is R. The right side of the bearing is shifted to a new position 2L apart from the left bearing. At the same rotor speed, dynamic reaction on the left bearing in the new arrangement will
Consider the following statements: In a plate girder 1. Bearing stiffeners are designed for bearing forces and they must also be checked for safety against compressive forces. 2. The length of any staggered intermittent fillet weld should not be less than 10 times the thickness of the stiffener. 3. Bearing stiffeners must be provided at the point of maximum bending moment. Which of the above statements are correct?
Consider the following statements regarding the inspection of a fabric.
1. Length of any fibre can be made into staple length, but not all can be filament length.
2. Body, textile, hand, soft to hard, rough to smooth, warm to cool or stiff to flexible.
3. Lustre or lack of lustre.
Which of the statements given above is/are correct?
Select the correct differences between char and varchar data types? i. varchar is non unicode and char is unicode character data type ii. char is ‘n’ bytes whereas varchar is actual length in bytes of data entered in terms of storage size iii. varchar is variable in length and char is the fixed length string iv. For varchar, if a string is less than the maximum length then it is stored in verbatim without any extra characters while for char if a string is less than the set length it is padded with extra characters to equalize its length to given length
The frictional torque transmitted in a flat pivot bearing, considering uniform wear, is (where μ = Coefficient of friction, W = Load over the bearing and R = Radius of bearing surface)
When the bearing is subjected to large fluctuations of load and heavy impacts, the bearing characteristic number should be _________ the bearing modulus.
If p = bearing pressure on projected bearing area, Z = absolute viscosity of lubricant and N = speed of journal, then the bearing characteristic number is given by
In a compass survey work of an open traverse ABCDE shown in the figure, the bearing of the first line AB observed was not clearly written in the field. The observed bearing of the last line DE was recorded as S36°40’E. If the deflection angles are 31°50' (right) at D, 42°30' (right) at C, and 18°20' (left) at B. calculate the bearing of the first line AB.