Bissoy.com
Doctors Medicines MCQs Q&A

_______________ is a Rotary type drill and its abrasive power depends on the bit which is in the form of a section of steel pipe with serrated or a roughened lower end.

_______________ is a Rotary type drill and its abrasive power depends on the bit which is in the form of a section of steel pipe with serrated or a roughened lower end. Correct Answer Shot drill

The Shot drill bit is rotated under pressure and the cuttings are removed by water which is supplied through the drill rod. Standard shot drills can drill holes to a depth of about 180 metres or more with diameter varying from 65 mm to 500 mm. It is possible to drill rock of any hardness with the help of these drills.

Related Questions

In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
Four pipes P, Q, R and S are connected to a tank. Pipe P, Q, R and S can fill the whole tank in 300/37 minutes. Ratio of time taken by pipe P to fill the tank when operating alone and pipe Q to fill the tank when operating alone is 3 : 2, pipe Q is 20% more efficient then pipe R and time taken by pipe S is 10 minutes more than pipe R. Find difference between time taken by pipe Q and pipe P to fill up the tank alone. 
To fill the tank Pipe A and Pipe B takes 12hours. Pipe B and Pipe C takes 9 hours to fill the tank and Pipe C and Pipe A together take 15 hours to fill the tank. Find the time taken to fill the tank when Pipe A, Pipe B and Pipe C opened together(approximately).
Pipe A takes 10 hours more than Pipe B to fill a tank. Pipe C(which is equally efficient as Pipe A and Pipe B together), fills the same tank in 12 hours. In how many hours will Pipe A, Pipe B and Pipe C fill the tank if Pipe A is accompanied by B and C on alternate hours.
Pipe A is 40% more efficient then pipe E, Pipe B requires 4 minutes less to fill up the tank alone then pipe E, ratio of time taken by Pipe C and pipe A is 5 : 6, pipe C requires 15 minutes to empty the whole tank, if all the pipes are opened together then it requires 48/ 11 minutes to fill up the whole tank. Find the ratio of time taken by pipe B and pipe C to fill up the tank alone.
A container of 425 liters was filled with chemicals through two pipes. The first pipe was kept open for 5 hours more than the second pipe. If the first pipe remains open for as long as the second pipe remains open, and the second pipe remains open for as long as the first pipe remains open, then the quantity of chemical filled by the first pipe was half the quantity of chemical filled by the second pipe. If both the pipes are opened simultaneously, the tank will be filled in 17 hours. For how long was the second pipe open?
Three pipes named Pipe A, Pipe B and Pipe C are using to fill/drain a tank. It takes 15 hrs to fill the tank if only Pipe A and Pipe B opened. And it will take 20 hrs if Pipe A and Pipe B  are used to fill the tank and Pipe C to drain. How much time will it take if all pipes used to fill the tank?
Pipes P and Q alone can fill a tank in 15 hours and 20 hours respectively. An inlet pipe R is 25% more efficient than pipe P and an outlet pipe S is 16(2/3)% less efficient than pipe Q. Pipe P and pipe S are opened together. If after 1 hour pipe Q is opened and after 1 more hour pipe R is opened, then in what time the tank will be filled ?