In concrete masonry, a hollow concrete block has a core-void area greater than __________ of the gross area.

In concrete masonry, a hollow concrete block has a core-void area greater than __________ of the gross area. Correct Answer 25%

Concrete masonry uses two types of cement concrete blocks for the construction of walls – hollow concrete block and solid concrete block. A hollow concrete block has a core-void area greater than 25% of the gross area.
Bissoy MCQ

Related Questions

In concrete masonry, a hollow concrete block has core-void area greater than __________ of the gross area.
Consider the following statements regarding bands to be provided for strengthening masonry work in masonry buildings constructed in zone III, IV and V.
(i) Lintel band is provided at lintel level on partition walls,
(ii) Gable band is provided at top of gable masonry below the purlins,
(iii) The bands shall be to full width of the wall and not less than 7.5 cm in depth,
(iv) The bands shall be made of reinforced concrete only.
of these statements, the correct statements are
Pyroxenes are class of silicate minerals, which exhibit a polymeric chain structure, as shown below
S-Block and P-Block Elements mcq question image
Its simplest repeating unit is
__________ masonry occupies an intermediate position between rubble masonry and ashlar masonry.
Consider the following statements:
(i) Masonry in rich cement mortar though having good strength with high shrinkage is much liable for surface cracks.
(ii) Lime mortar possesses poor workability and poor water retentivity and also suffers high shrinkage.
(iii) Masonry in lime mortar has better resistance against rain penetration and is less liable to crack when compared to masonry in cement mortar.
Which of these statements are correct?
______ type of ashlar masonry occupies an intermediate position between the rubble masonry and ashlar masonry.
In stone composite masonry, ashlar masonry is used in backing of the wall while rubble masonry is used in the facing.
A spring mass system is on a horizontal plane. Spring constant is 2N/m & mass of block is 2kg. The spring is compressed by 10cm and released. A small ball is released from a height of 2m above the block on the horizontal plane. At what time should the ball be left if the block is released from the extreme position at t=0, given that the ball has to fall on the block when the speed of block is maximum?
A spring block system is on a horizontal surface. The block is compressed by 10cm. What should be the coefficient of friction between the block and ground such that the block comes to a stop at the mean position? Mass of block = 0.5kg & spring constant = 3N/m.
In concrete masonry, hollow concrete units are used for _________ walls.