Bissoy.com
Doctors Medicines MCQs Q&A

Consider the following statements:
(i) Masonry in rich cement mortar though having good strength with high shrinkage is much liable for surface cracks.
(ii) Lime mortar possesses poor workability and poor water retentivity and also suffers high shrinkage.
(iii) Masonry in lime mortar has better resistance against rain penetration and is less liable to crack when compared to masonry in cement mortar.
Which of these statements are correct?

Consider the following statements:
(i) Masonry in rich cement mortar though having good strength with high shrinkage is much liable for surface cracks.
(ii) Lime mortar possesses poor workability and poor water retentivity and also suffers high shrinkage.
(iii) Masonry in lime mortar has better resistance against rain penetration and is less liable to crack when compared to masonry in cement mortar.
Which of these statements are correct? Correct Answer (i) and (iii)

Related Questions

The influence of shape of aggregate in strength and workability of concrete are given below in statements S1, S2, S3 and S4. Which of the statements are correct? S1: Rounded aggregate produces concrete with high workability and low strength. S2: Angular aggregate produces concrete with high workability and low strength. S3: Rounded aggregate produces concrete with low workability and high strength. S4: Angular aggregate produces concrete with low workability and high strength.
Assertion A : For identical strength, a composite cement-lime mortar is preferred over cement mortar.Reason R : Composite cement-lime mortar has higher drying shrinkage than cement mortar.Select your answer based on the codes given below. Codes:
Consider the following statements: 1. Bricks in masonry arc bound by mortar. 2. Mortars make bricks damp. proof. 3. Strength of brick in masonry is improved by plastering. 4. Addition of lime improves workability. 5. Marine constructions need sulphate-resistant cement mortar. Which of the above statements are relevant for 'cement mortar?
Consider the following statements related to composite mortar: 1. Addition of lime to cement mortar improves its workability 2. Composite mortar is obtained by adding 10% by weight of cement and mixing with water. 3. Composite mortar is not preferred in tall buildings 4. Mechanical grinding is essential for developing composite mortar. Which of the above statements are true in this case?
Which of the following statements are correct with regard to cement mortar? 1. Workability of cement mortar can be improved by addition of lime. 2. Fly-ash cement is economical in plastering jobs. 3. Addition of saw dust improves workability 4. Sand in mortar can be replaced by finely crushed fire bricks
Consider the following related to sand in mortars: 1. It increases the volume of the mortar mix. 2. It increase the strength of masonry. 3. The cost of the mortars is reduced. 4. Shrinkage of the mortar is almost prevented. 5. Surkhi can replace sand in cement mortar used in plastering and this modified mortar is more durable. Which of the above are relevant to ‘sand’ in mortar?
Assertion A : Lime based mortars give higher ratio of brickwork strength to mortar strength as compared to non-lime mortar.Reason R : Lime based mortars have lower bond strength as compared to non-lime mortars.Select your answer according to the codes given below:
Assertion A : Lime based mortars give higher ratio of brickwork strength to mortar strength as compared to non-lime mortar.
Reason R : Lime based mortars have lower bond strength as compared to non-lime mortars.
Select your answer according to the codes given below:
Consider the following statements: 1. If more water is added to concrete for increasing its workability, it results into concrete of low strength. 2. No slump is an indication of a good workable concrete. 3. Higher the slump of concrete, lower will be its workability. 4. Workability of concrete is affected by water content as well as water-cement ratio. Which of the above statements are correct?
Which of the following statements are correct with reference to ensuring minimum shrinkage of prestressed concrete? 1. The water-cement ratio and proportion of cement paste should be kept minimum to reduce shrinkage. 2. Aggregates of larger size, well graded for minimum void, need a smaller amount of cement paste, and attendant shrinkage will be smaller. 3. Harder and denser aggregates of low water absorptions and high modulus of elasticity will exhibit small shrinkage.