Bissoy.com
Doctors Medicines MCQs Q&A

A canal drop is 6 meters and discharges available through the turbine is 50 cumec. Find the electrical energy available.

A canal drop is 6 meters and discharges available through the turbine is 50 cumec. Find the electrical energy available. Correct Answer 2352 KW

The electrical energy (in kW) = 7.84 Q H (using 80% efficiency) where H is the design head in meters and Q is the design discharge in cumecs. Electrical energy = 7.84 x 50 x 6 = 2352 kW.

Related Questions

Which of the following statement(s) is/are incorrect? (i) A turbine is called an impulse turbine if at the inlet of the turbine total energy is only kinetic energy (ii) A turbine is called a reaction turbine if at the inlet of the turbine the total energy is kinetic energy and pressure energy (iii) The inward flow reaction turbine having radial discharge at the outlet is known as Kaplan turbine
Match the following Device Conversion of Energy (a) Windmill (i) Chemical Energy to electrical energy (b) Bulb (ii) Kinetic Energy to Electrical Energy (c) Electrical Cell (iii) Sound Energy to Electrical energy (d) Microphone (iv) Electrical Energy to Light Energy
Which one is incorrect? 1. Kumabaram Lift Canal-Older name - Nohar Sohwa Lift Canal. 2. Kawar sen Lift Canal-Older name - Lunaksar Lift Canal. 3. Panna Lal Lift Canal - Older name - Gajner Lift canal. 4. Veer Tejaji Lift Canal-Older name - Bagdsar.
What does hydropower change A. Kinetic energy to electrical energy B. Mechanical energy from electrical energy C. Chemical energy to electrical energy D. Wind energy to electrical energy
Consider the following regarding the transformation of energy.  I. Dynamo: Electrical energy into mechanical energy  II. Sitar: Electrical energy into sound energy  III. Tube light: Electrical Energy into light energy  Which among the above is/are correct?
In a race of 1000 meters, A can beat B by 100 meters, in a race of 800 meters, B can beat C by 100 meters. By how many meters will A beat C in a race of 600 meters?
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it.
Modern civilization is completely dependent on energy, which has therefore to be abundant and also economical. About 85% of the world's energy is supplied by oil, coal and natural gas while nuclear, hydro, wind and solar power and biomass supply the rest. Coal, nuclear and hydro are used primarily to generate electricity while natural gas is widely used for heating. Biomass is used both for heating and cooking. The wind and solar power is the future's hope as they are sustainable energy sources. Oil powers almost all machines that move and that makes oil uniquely versatile. Oil powered airplanes carry 500 people across the widest oceans at nearly the speed of sound. Oil powered machines produce and transport food. Oil powered machines are ubiquitous. Clearly, we live in the age of oil but it is drawing to a close. According to data available if oil production remains constant until it's gone, there is enough to last 42 years. Oil wells will produce less as they become depleted, which will make it impossible to keep production constant. Similarly natural gas and coal will last another 61 years and 133 years respectively. Naturally, as they become scarce, they become expensive, leading to a worldwide energy crisis. If we are to survive on this planet, we have to make a transition to sustainable energy sources. The transition may be willy-nilly or planned - the choice is ours. The dawning era of limited and expensive energy will be very difficult for everyone on earth but will be even more difficult if it is not anticipated. It is of utmost importance that the public and policymakers understand the global energy crisis and act in tandem to ensure that the species 'homo sapiens' does not become extinct. Biomass is an energy source used in
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it.
Modern civilisation is completely dependent on energy, which has therefore to be abundant and also economical. About 85% of the world's energy is supplied by oil, coal and natural gas while nuclear, hydro, wind and solar power and biomass supply the rest. Coal, nuclear and hydro are used primarily to generate electricity while natural gas is widely used for heating. Biomass is used both for heating and cooking. The wind and solar power is the future's hope as they are sustainable energy sources. Oil powers almost all machines that move and that makes oil uniquely versatile. Oil powered airplanes carry 500 people across the widest oceans at nearly the speed of sound. Oil powered machines produce and transport food. Oil powered machines are ubiquitous. Clearly, we live in the age of oil but it is drawing to a close. According to data available if oil production remains constant until it's gone, there is enough to last 42 years. Oil wells will produce less as they become depleted, which will make it impossible to keep production constant. Similarly natural gas and coal will last another 61 years and 133 years respectively. Naturally, as they become scarce, they become expensive, leading to a worldwide energy crisis. If we are to survive on this planet, we have to make a transition to sustainable energy sources. The transition may be willy-nilly or planned - the choice is ours. The dawning era of limited and expensive energy will be very difficult for everyone on earth but will be even more difficult if it is not anticipated. It is of utmost importance that the public and policymakers understand the global energy crisis and act in tandem to ensure that the species 'homo sapiens' does not become extinct. The energy sources of the future are
Which of the following canals were constructed as a part of the Triple Canal Project that began in 1905? 1. Upper Bari Doab Canal 2. Upper Jhelum Canal 3. Upper Chenab Canal 4. Lower Bari Doab Canal
Consider the following statements in connection with hydraulic turbines: 1. The Kaplan turbine is a radial flow turbine in which the guide vane angles as well as the runner vane angles are adjustable. 2. Francis and Kaplan turbines are provided with draft tubes which carry water from exit of runner to tail water to increase the gross head across the turbine. 3. The parts of turbines susceptible to cavitation are the guide vanes and runner vanes – drastically reducing the turbine efficiency. 4. The specific speed of a 4-jet Pelton turbine will be 28 if the specific speed of a single-jet Pelton turbine is 14. Which of the above statements are correct?