Bissoy.com
Doctors Medicines MCQs Q&A

Calculate the diameter of the inlet well if the X and Y coordinate of the jet (issuing from the centre of pressure) w.r.t the water surface in the inlet well is 1.05 m and 1.88 m respectively.

Calculate the diameter of the inlet well if the X and Y coordinate of the jet (issuing from the centre of pressure) w.r.t the water surface in the inlet well is 1.05 m and 1.88 m respectively. Correct Answer 1.575 m

The diameter of the inlet well is kept as 1.5 times the value of X. Given, X = 1.05 and Y = 1.88 Diameter = 1.5 x 1.05 = 1.575 m.

Related Questions

What is the height of the centre of pressure above the water level in the inlet well if the R.L of the centre of pressure is 150.83 m and the R.L of water level in inlet well is 148.30 m?
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where $${I_{\text{G}}}$$ = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface and x = Depth of centre of gravity of the immersed surface from the liquid surface)
Consider the following statements with reference to Jet stream. 1. The Jet Stream is a geostrophic wind. 2. There are two permanent jet streams – subtropical jets at mid-latitudes and polar front jets at lower latitudes. 3. Temperature also influences the velocity of the jet stream. The lower the difference in air temperature, the faster the jet stream. Which of the statements given above is/are NOT correct?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: There are two inlet pipes A, B and two outlet pipes C, D inlet pipe B takes 7 hours more to fill the tank when compared to A. Two outlet pipes when working together can empty the tank in 3.5 hours and efficiency of both the pipe is same if all of them working together can fill the tank in 2 hours. Calculate the time taken by A to fill the tank. Quantity B: The ratio of efficiencies of two pipes A and B is in the ratio 3 ∶ 2 and that of pipe B and C is 1 ∶ 3. Pipe A and B are inlet pipes, pipe C is outlet pipe working together they can fill the tank in 7.5 hours. Calculate the time taken by A to fill the tank when working alone.
Water, having a density of 1000 kg/m3, leave from a nozzle with a velocity of 10 m/s and the jet strikes a bucket mounted on a Pelton wheel. The wheel rotates at 10 rad/s. The mean diameter of the wheel is 1 m. The jet is split into two equal streams by the bucket, such that each stream is deflected by 120°, as shown in the figure. Friction in the bucket may be neglected. Magnitude of the torque exerted by the water on the wheel, per unit mass flow rate of the incoming jet, is
Given below are three quantities named A, B and C. Based on the given information, determine the relation among the three quantities. Quantity A∶  A 30 litre mixture of wine and water has wine and water in the ratio 5∶ 7. How much water must be drawn off so that the ratio of wine and water becomes 25∶ 19? Quantity B∶ A 35 litre mixture of wine and water has wine and water in the ratio 1∶ 3. How much water must be drawn off so that the ratio of wine and water becomes 1.75∶ 3.35? Quantity C∶ A 27 litre mixture of wine and water has wine and water in the ratio 3∶ 2. How much water must be drawn off so that the ratio of wine and water becomes 81∶ 11?
Find the diameter of jet D, if jet ratio m and diameter of jet d are given as 10 and 125mm.
A jet of water is striking at the centre of a curved vane moving with a uniform velocity in the direction of jet. For the maximum efficiency, the vane velocity is ________ of the jet velocity
The following table presents the number of candidates trained by a training centre over 6 years (2001 to 2006). Year Batch 1 Batch 2 Batch 3 Batch 4 Batch 5 2001 75 144 114 102 108 2002 90 126 102 84 126 2003 96 114 75 105 135 2004 105 90 150 90 75 2005 90 75 135 75 90 2006 105 60 165 45 120 The number of candidates trained in Batch 2 in 2001 was what percentage more than the number of candidates trained in Batch 5 in 2005?