Related Questions

Two outlets of a motor manufacturing company reported that revenue from outlet x in 2013 was down 11 percent from 2012. and revenue from outlet Y in 2013 were up 7 percent from 2012. If total revenue from outlet X & Y in 2013 was up 1 percent from 2012, what is the ratio of revenue from outlet X in 2012 revenue from outlet Y in 2012?
A tank has an inlet and outlet pipe. The inlet pipe fills the tank completely in 2 hours when the outlet pipe is plugged. The outlet pipe empties the tank completely in 6 hours when the inlet pipe is pluggeed. If there is a lekage also which is capable of draining out the liquid from the tank at half of the rate of outet pipe,them what is the time taken to fill the emty tank when both the pipes are opened?
What is the cross sectional shape of shallow surface drains?
Catch water drains, sloping drain, road side drains, catch pit and culverts are periodically cleared to prevent __________
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where $${I_{\text{G}}}$$ = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface and x = Depth of centre of gravity of the immersed surface from the liquid surface)
At a 33kV 50 Hz to a bus a load of 35 MW is connected. To improve the power factor to unity a synchronous phase modifier is connected taking 5 MW. If the SPM is represented as delta connected impedance, where in each phase we have capacitor connected parallel to resistance forming RC parallel network, then the value of this resistance is ___________
At a 33kV 50 Hz to a bus a load of 35 MW is connected. To improve the power factor to unity a synchronous phase modifier is connected taking 5 MW. If the SPM is represented as delta connected impedance, where in each phase we have capacitor connected parallel to resistance forming RC parallel network, then the value of this capacitance is __________
An outlet irrigates an area of 40 ha. The discharge required at this outlet to meet the evapotranspiration requirement of 40 mm occurring uniformly in 40 days neglecting other field losses is _________
When the flexibility of an outlet equals unity, then the outlet is said to be in?
In Pelton wheel, if outlet velocity angle of jet is “acute angled” then outlet whirl velocity of jet is ______________