Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

The minimum specific energy of a rectangular channel is 1.3m and the base width of the channel is 10m, calculate the discharge through the channel.
The ratio between normal discharge and maximum discharge through a rectangular channel is 32:6, calculate the depth of the channel if the width of the channel is 4m and bed slope, chezy’s constant remains same.
Two centrifugal pumps P and R are available for use in a pipe flow system and their head-discharge characteristics are as follows. Pump P Pump R Discharge (cumecs) Head (m) Discharge (cumecs) Head (m) 0 40 0 45 0.12 35 0.14 40 0.2 28 0.24 35 0.3 18 0.3 28   The following statements (S1, S2, and S3) pertain to the head and discharge values during actual operation. Neglect losses in the system. Which of the following statements are correct? S1: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 35 m. S2: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 70 m. S3: When the two pumps P and R are connected in series, the discharge is 0.3 cumecs corresponding to a head of 46 m.
Calculate the total discharge through a rectangular channel having critical depth of 1.18m and the base width of the channel is 4m.
The base width and the depth of a trapezoidal channel is 9m and 5m respectively. Calculate the discharge through a channel if the side slope of the channel is 1H:4V and the bed slope is 1 in 500. (n=0.04)
The ratio between depth and width of a rectangular channel is ¼ and the area of the rectangular section is 16m^2. Calculate the top width of the channel.
The maximum discharge through the trapezoidal channel is 20 m3/s and the velocity of flow is 5 m/s. Calculate the base width of the channel if the side slope is 1H:4V.
Some small cubes of same height 7 cm but variable length and width are put inside a large cuboid of height 21 cm. Length and width of cuboid is 32 cm and 24 cm, respectively. Small cubes are put such that cubes at the bottom most layer is of similar base area; second layer contains all the cubes of similar base area and third layer have all the cubes of similar base area. Which of the following statement(s) given below is / are TRUE? A: If side of each small cubes at bottom most layer is 8 cm, then maximum number of small cubes that can be put at bottom most layer is 12. B: If maximum of 48 cubes can be put at second layer, then side of each cube at second layer is 6 cm. C: If side of each small cubes at third layer is 1.6 cm, then maximum number of small cubes that can be put at third layer is 300.
The ratio between maximum discharge and top width of a rectangular channel is 91:50, calculate the depth of the channel if the bed slope is 1 in 3000 and C = 50.
The discharge through a rectangular channel is 16.62 m3/s and the wetted area is equal to 12m2. The width of the channel is 6m and the bed slope is 1 in 1000, calculate the value of the Chezy’s constant.