Bissoy.com
Doctors Medicines MCQs Q&A

Reactive shunt compensation cannot maintain the desired voltage profile along the transmission line in spite of changing real power demand.

Reactive shunt compensation cannot maintain the desired voltage profile along the transmission line in spite of changing real power demand. Correct Answer False

Reactive shunt compensation aims at maintaining the desired voltage profile along the transmission line in spite of changing real power demand. It is highly effective method to control the in voltage variation along the transmission line. Thus specified voltage level is maintained at the load end of a sub-transmission or distribution system.

Related Questions

________ maintains the desired voltage profile along the transmission line in spite of changing real power demand.
Without proper reactive shunt compensation techniques, an increase in real power transmission will certainly result in an increase of reactive power demand at the end-voltage generators.
Without proper reactive shunt compensation techniques, an increase in real power transmission will result in ________ at the end-voltage generators.
Without proper compensation techniques, an increase in real power transmission will certainly result in an increase of reactive power demand at the end-voltage generators.
Proper compensation techniques cause an increase in reactive power demand at the end-voltage bus system with an increase of real power transmission.
A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from the vertical plane and 5 cm from the horizontal plane. What is distance from the point on line far away from the profile plane to profile plane?
Assume a 275 kV transmission line having the following line constants:A = 0.85∠5° ; B = 200∠75° If a load is connected at receiving end at unity power factor but maintaining the same voltage profile. The receiving end voltage if the compensation equipment is not installed will be __________
Below stated are some of the statements about the Alternating current. You need to identify which of the following is incorrect, 1. DC power is far more powerful than AC power. The efficiency and power to size characteristics of DC motors and apparatuses are increased. Lighting by DC (LED) is 75% more efficient than lighting from incandescence. 2. A comparatively high voltage alternating current may be generated and easily raised and dropped by the static equipment known as the transformer, which makes electrical energy transmission and distribution economical, 3. Initial costs and maintenance of the AC motor are less expensive since it has no switch and is less powerful than the DC motor for constant working speed, hence it is desired to create power as alternating current. 4. The great efficiency of transmission in ac makes electric power generation cost-effective, Produced in huge quantities in one station and distributed throughout a vast area.
Under the condition for 3 phase alternator, maximum active power output, the delivered reactive power output is ________ while under maximum reactive power output, the delivered reactive power is ________
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.