Bissoy.com
Doctors Medicines MCQs Q&A

In electrical power system, unlike FACTS, traditional methods of managing the active and reactive power include fixed and mechanically switched shunt and series capacitors, reactors and synchronous generators.

In electrical power system, unlike FACTS, traditional methods of managing the active and reactive power include fixed and mechanically switched shunt and series capacitors, reactors and synchronous generators. Correct Answer True

It is true that in electrical power system, unlike FACTS, traditional methods of managing the active and reactive power include fixed and mechanically switched shunt and series capacitors, reactors and synchronous generators. On the other hand, FACTS is a power-electronics based system. Therefore, instead of large rotating machines being used as synchronous condensers or mechanically switched capacitor banks to compensate for reactive power; FACTS employ static equipment, VAR compensators controlled by power electronic devices like thyristors for making up or taking away reactive power.

Related Questions

A power system has three synchronous generators. The turbine-governor characteristics corresponding to the generators are P1 = 50(50 - f), P2 = 100(51 - f), P3 = 150(52 - f) Where, f denotes the system frequency in Hz, and P1, P2, P3 are the power outputs of the turbines in MW. Assuming generators and transmission network to be lossless, the system frequency for a load of 700 MW is
A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
Without proper reactive shunt compensation techniques, an increase in real power transmission will certainly result in an increase of reactive power demand at the end-voltage generators.
Generally ________ is regarded as to contain the shunt-connected, thyristor-controlled reactors or thyristor-switched capacitors or their combinations.
A person purchases 10 used generators at Rs. 2,000 each. Accessories of Rs. 5,000 were used to repair and paint the generators. He was able to sell 6 generators at Rs. 2,500 each but incurred a loss of 10% in the whole deal. Find the selling price of each generator and loss percentage on each generator of remaining generators.
In the following question, sentences of a paragraph have been jumbled and labeled as A, B, C, and D. You are required to rearrange the jumbled sentences in the right order to form a meaningful and coherent paragraph and mark your response accordingly by selecting the correct option. A. Thus, traditional food is food with a specific feature or features which distinguish it clearly from other similar products of the same category in terms of the use of “traditional ingredients” (raw material of primary products). B. Preparation methods of traditional foods are part of the folklore of a country or a region. C. The use of particular food ingredients and food preparation methods has been passed on from one generation to the next and are nowadays referred to as “traditional food”. D. It played a major role in the traditions of different cultures and regions for thousands of years, including foods that have been consumed locally and regionally for an extended time period.
Under the condition for 3 phase alternator, maximum active power output, the delivered reactive power output is ________ while under maximum reactive power output, the delivered reactive power is ________
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count thereby reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification. In a BCD Subtractor if the sum of minuend and the nine’s complement of the subtrahend is not a valid BCD Code, then which binary number is added to the sum to get the correct answer?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   A ROM is to be used to implement a “Squarer”, which outputs the square of a 3-bit number. What must be the size of the ROM?