Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Two centrifugal pumps P and R are available for use in a pipe flow system and their head-discharge characteristics are as follows. Pump P Pump R Discharge (cumecs) Head (m) Discharge (cumecs) Head (m) 0 40 0 45 0.12 35 0.14 40 0.2 28 0.24 35 0.3 18 0.3 28   The following statements (S1, S2, and S3) pertain to the head and discharge values during actual operation. Neglect losses in the system. Which of the following statements are correct? S1: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 35 m. S2: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 70 m. S3: When the two pumps P and R are connected in series, the discharge is 0.3 cumecs corresponding to a head of 46 m.
The power output of the shaft is 5 MW. The volume flow rate of water in 10 m3/s at an available head of 60 m. Find the overall efficiency of the turbine in % (g = 10 m/s2)?
The volume flow rate of water in 10 m3/s at an available head of 60 m (g = 10 m/s3). Find the shaft power (in MW) if the overall efficiency of the turbine is 90%.
In a Kaplan Turbine experimental setup, the power output of the shaft is 4.325 MW. The volume flow rate of water in 15 m3/s at an available head of 50 m. Find the overall efficiency of the turbine in % (g = 10 m/s2)?
In Kaplan turbine apparatus, the volume flow rate of water in 15 m3/s at an available head of 55 m (g = 10 m/s2). Find the shaft power (in MW) if the overall efficiency of the turbine is 95%.
Determine the capacity of hydro power plant to be used 8 hours peaking plant assuming daily flow in a river to be constant at 65m3/s. and overall efficiency is 80% and head 12m?
Which of the following power plant is a mismatch? Harduaganj Thermal Power Plant - Aligarh District Obra power plant - Sonbhadra District  Anpara thermal power plant - Lalitpur District
In a solar operated steam power plant, water is converted into steam via solar heat. If the effective area of solar plate is 200m2, value of solar constant is 1.362KW per m2, efficiency of solar components is 17% and overall thermal efficiency of steam cycle desired is 12%. Find the turbine power output?
Which of the following statements are true/false?
1. A minimum rate of wages for the time spent by employees for the production of output is minimum time rate.
2. Minimum piece rate is the rate based on the quantity of the output employees have produced.
3. The guaranteed time rate is a minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis.
4. A minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis is overtime rate.
Below stated are some of the statements about the Alternating current. You need to identify which of the following is incorrect, 1. DC power is far more powerful than AC power. The efficiency and power to size characteristics of DC motors and apparatuses are increased. Lighting by DC (LED) is 75% more efficient than lighting from incandescence. 2. A comparatively high voltage alternating current may be generated and easily raised and dropped by the static equipment known as the transformer, which makes electrical energy transmission and distribution economical, 3. Initial costs and maintenance of the AC motor are less expensive since it has no switch and is less powerful than the DC motor for constant working speed, hence it is desired to create power as alternating current. 4. The great efficiency of transmission in ac makes electric power generation cost-effective, Produced in huge quantities in one station and distributed throughout a vast area.