Which air is supplied separately to ensure complete combustion in pulverized fuel firing system?

Which air is supplied separately to ensure complete combustion in pulverized fuel firing system? Correct Answer Secondary air

The amount of secondary air required to complete the combustion is blown separately and resulting turbulence in the high pressure combustion chamber helps in through mixing of fuel and air. For better combustion result this type of mixing is done.
Bissoy MCQ

Related Questions

In order to burn a fuel completely, which of the following basic conditions must be fulfilled? 1. Supply enough air for complete combustion of fuel. 2. Secure low turbulence for thorough mixing of fuel and air. 3. Maintain a furnace temperature high enough to ignite the incoming fuel air mixture. 4. Provide a furnace volume large enough to allow time for combustion to be completed. Select the correct answer using the code given below:
Which of the following are essential for a good combustion chamber of turbojet engine? 1. It should allow complete combustion of fuel. 2. It should maintain sufficiently high temperature in the zone of combustion in addition to proper atomization of fuel thus leading to continuous combustion. 3. It should not have high rate of combustion. 4. The pressure drop should be as small as possible
A draught of 15mm of water is produced by using a chimney of height 30m. The ambient air and flue gases are at 27oC and 300oC respectively. The coal burned on the grate contains 81% carbon, 5% moisture and remaining ash. Neglect the losses and assume values of burnt products equivalent to the volume of air supplied and for the complete combustion of fuel, find the percentage of excess of air supplied?
Which separator is used to separate the pulverized coal in pulverized fuel firing?
Which system was used before direct firing system in pulverized fuel firing?
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
What is minimum amount of air required per m3 of gaseous fuel for complete combustion? m3/m3 of fuel b) 1/100 m3/m3 of fuel c) 1/21 m3/m3 of fuel d) 1/100 m3/m3 of fuel
Why is combustion rate faster when the usage of pulverized coal is done in pulverized fuel handling?
What is the main aim of Automatic control combustion in pulverized fuel firing?
Which type of draught system is used in the pulverized fuel firing system?