The best stub selection for the transmission line will be

The best stub selection for the transmission line will be Correct Answer Shunt short

Normally series stubs are not preferred as modification of the stub parameters requires changing the whole stub setup. Shunt stubs enable modification with ease. Open circuited stubs are not preferred as it will radiate power like an antenna, which is undesirable. Hence shorted stubs are used.
Bissoy MCQ

Related Questions

If the normalized admittance at a point on a transmission line to be matched is 1+j1.47. Then the normalized susceptance of the stub used for shunt stub matching is:
In series stub matching, if the normalized impedance at a point on the transmission line to be matched is 1+j1.33. Then the reactance of the series stub used for matching is:
If the transmission co-efficient T₁ of a transmission line is 1.333 and the characteristic impedance of the λ/4 transmission line used is 100Ω, then the characteristic impedance of the transmission line is:
For a lossy transmission line, γ=0.02+j0.15 and is 20m long. The line is terminated with an impedance of a 400Ω. Then the input impedance of the transmission line given that the characteristic impedance of the transmission line is 156.13+j11.38Ω is:
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives. _______________ the course of the development of different life-forms heredity—which, in plain English, is unconscious memory generated in the first life-form and ______________ through all the different species—is the sole factor in the ____________ of the parent properties; while adaptation to surrounding conditions and circumstances, natural selection in the struggle _____________ existence, and partner selection in the struggle of the males for ____________ are the principalfactors in the differentiation of species. natural selection in the struggle _____________ existence, and partner selection
The two adjustable parameters in single stub matching are distance‘d’ from the load to the stub position, and _________
In a double stub tuner circuit, the load is of _______ length from the first stub.
The characteristic impedance of the transmission line if the outer diameter and inner diameter of the transmission line is 20 mm and 10 mm respectively, given the intrinsic impedance of the medium is 377 Ω, then the characteristic impedance of the transmission line is:
If a λ/4 transmission line is 100Ω is used to match a transmission line to a load of 100Ω, then the characteristic impedance of the transmission line is:
If the characteristic impedance of a transmission line is 50 Ω, and the inductance of the transmission line being 25 mH/m, the capacitance of the lossy transmission line is: