The normalised load impedance of the transmission line 50 ohm with a load of 30 ohm is

The normalised load impedance of the transmission line 50 ohm with a load of 30 ohm is Correct Answer 3/5

The normalised impedance is calculated by dividing the impedance with the characteristic impedance. Given that the load impedance is 30 ohm, the normalised load impedance of the 50 ohm transmission line is 30/50 = 3/5 ohm.
Bissoy MCQ

Related Questions

For a lossy transmission line, γ=0.02+j0.15 and is 20m long. The line is terminated with an impedance of a 400Ω. Then the input impedance of the transmission line given that the characteristic impedance of the transmission line is 156.13+j11.38Ω is:
The characteristic impedance of the transmission line if the outer diameter and inner diameter of the transmission line is 20 mm and 10 mm respectively, given the intrinsic impedance of the medium is 377 Ω, then the characteristic impedance of the transmission line is:
If the transmission co-efficient T₁ of a transmission line is 1.333 and the characteristic impedance of the λ/4 transmission line used is 100Ω, then the characteristic impedance of the transmission line is:
Find the load impedance in a quarter line transformer with characteristic impedance of 75 ohm and input impedance of 200 ohm.
For maximum power transfer, a lossless transmission line 50 ohm is to be matched to a resistive load impedance of 100 ohm. The characteristic impedance of the wavelength/4 transformer is
When a transmission line of characteristic impedance(50Ω) zₒ is matched to a load by a λ/4 transmission line of characteristic impedance 100Ω, then the transmission co efficient is:
Consider a transmission line of characteristic impedance 50 ohm. Let it be terminated at one end by +j50 ohm. The VSWR produced by it in the transmission line will be
One end of a lossless transmission line having the characteristic impedance of 75 ohm and length of 1 cm is short circuited. At 3 GHz, the input impedance at the other end of the transmission line is
If a λ/4 transmission line is 100Ω is used to match a transmission line to a load of 100Ω, then the characteristic impedance of the transmission line is:
A transmission line of pure resistance characteristic impedance is terminated with an unknown load. The measured value of VSWR on the line is 2 and a voltage minimum point is found to be at the load. The load impedance is then