Bissoy.com
Doctors Medicines MCQs Q&A

Bandpass filter used in foetal phonocardiogram rejects all frequencies outside the ________ Hz range.

Bandpass filter used in foetal phonocardiogram rejects all frequencies outside the ________ Hz range. Correct Answer 70-110

To pick up the heart sounds, it is essential that the transducer be properly placed and its impedance carefully matched. A crystal microphone is used for picking up phono signals. The phono transducer signals are amplified by a low noise preamplifier and fed to a bandpass filter which rejects all frequencies outside the 70 to 110 Hz range.

Related Questions

Which of the following statements are correct? 1. A lowpass filter passes low frequencies and stops high frequencies. 2. A highpass filter passes high frequencies and rejects low frequencies 3. A bandpass filter passes frequencies within a frequency band and attenuates frequencies outside the band. 4. A bandstop filter passes frequencies within the band and blocks/attenuates frequencies outside a frequency band.
A filter that passes all frequencies lying outside a certain range, while it attenuates all frequencies between the two designated frequencies is called?
A rotary drum filter with 30% submergence is used to filter concentrated aqueous slurry of calcium carbonate containing 15lb of solids per cubic foot of water. The pressure–drop is 2011Hg. If the filter cake contains 50% mixture (wet basis), calculate the filter area required to filter 10 gal/min of slurry. The filter cycle time is 5 min. The specific cake resistance depends on the pressure–drop as: α (ft/lb) = α (Δp)0.26, where α = 2.90×1010 Viscosity of the filtrate = 6.72×10-4 lb/ft-s. Density of calcium carbonate = 168.8 lb/ft3. Neglect filter medium resistance.
In a filter, all the frequencies inside a circle of radius D0 are not attenuated while all frequencies outside circle are completely attenuated. The D0 is the specified nonnegative distance from origin of the Fourier transform. Which of the following filter(s) characterizes the same?
A band-stop filter passes frequencies between its lower and upper critical frequencies and rejects all others.
A bandpass filter rejects direct current.
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is very high, the filter approaches to which of the following filter(s)?
Butterworth lowpass filter has a parameter, filter order, determining its functionality as very sharp or very smooth filter function or an intermediate filter function. If the parameter value is of lower order, the filter approaches to which of the following filter(s)?
A filter that passes frequencies between two designated cut-off frequencies and attenuates all other frequencies is called?
A band-pass filter rejects all frequencies within a band between a lower and an upper critical frequency and passes all others.