Bissoy.com
Doctors Medicines MCQs Q&A

A single phase distributor of 1 km long has resistance and reactance per conductor of 0.1Ω and 0.15 Ωrespectively. If the far end voltage Vb=200V and current is at 100A at 0.8 lag. At the midpoint a current of 100A is tapped at a pf of 0.6 pf with ref to voltage Vm at mid point. The voltage magnitude at M is ________

A single phase distributor of 1 km long has resistance and reactance per conductor of 0.1Ω and 0.15 Ωrespectively. If the far end voltage Vb=200V and current is at 100A at 0.8 lag. At the midpoint a current of 100A is tapped at a pf of 0.6 pf with ref to voltage Vm at mid point. The voltage magnitude at M is ________ Correct Answer 218V

Drop in MB= (100ʟ-36.67)(0.1+j0.15)= 18.027ʟ19.44 VM= 200+18.027 = 218.027 V.

Related Questions

A single phase distributor of 1 km long has resistance and reactance per conductor of 0.1Ω and 0.15 Ω respectively. If the far end voltage Vb=200V and current is at 100A at 0.8 lag. At the midpoint a current of 100A is tapped at a pf of 0.6 pf with ref to voltage Vm at mid point. The voltage magnitude at M is __________
How far is point 'R' from Point 'T'? Statement (I): Point 'R' is 5 metres to the north of point 'M'. Point 'U' is 4 metres to the east of point 'R'. Point 'T' is to the west of point 'R' such that points 'U' 'R' and 'T' form a straight line of  metres. Statement (II): Point 'Z' is metres to the south of point 'T'. Point 'U' is  metres to the east of point 'T'. Point 'M' is  metres to the east of point 'Z'. Point 'R' is  metres to the north of point 'M'. Point 'R' lies on the line formed by joining points 'T' and 'U'.
A three-phase cylindrical rotor synchronous generator has a synchronous reactance Xs and a negligible armature resistance. The magnitude of per phase terminal voltage is VA and the magnitude of per phase induced emf is EA. Considering the following two statements, P and Q, P: For any three-phase balanced leading load connected across the terminals of this synchronous generator, VA is always more than EA Q: For any three-phase balanced lagging load connected across the terminals of this synchronous generator, VA is always less than EA Which of the following options is correct?
Point A is 3m in the north of point B. Point D is 2m in the east of point E. Point F is 9m in the west of point G. Point C is 4m in the west of point B. Point C is 3m in the south of point D. Point F is 5m in the south of point E. Point H is 5m in the north of point G. What is the shortest distance between point H and point A?
Study the following information and answer the questions. Point A is 8m to the west of Point B. Point C is 4m to the south of Point B. Point D is 4m to the east of Point C. Point F is 6m to the north of Point D. Point E is 8m to the west of Point F. Point G is 2m to the south of Point E. How far and in which direction is Point G from Point A?
The network formed by resistors and capacitors for modifying the rate of change of gain and the phase shift is called a compensating network. Which of the following statements are not correct ? (A) The main purpose of a compensating network is to modify the performance of op-amp ciruit over the desired frequency range (B) There are two types of op-amps : internally compensated and externally compensated (C) 741 C is an externally compensated op-amp while 709 C is internally compensated op-amp (D) The phase lag and phase lead are most commonly used compensating networks in op-amps (E) Phase lag contributes a positive phase angle and phase lead a negative phase angle Choose the most appropriate answer from the options given below : 
Point A is 5m in the north of point B. Point D is 5m in the south of point C. Point E is 16m in the north of point F. Point D is 6m in the west of point G, which is the midpoint of line formed by E and F. Point D is 3m in the east of point B. What is the shortest distance between point D and point F?
Point P is 4m in the west of point V. Point R is 6m in the north of point Q. Point T is 5m in the south of point S. Point V is in the middle of point R and Q. Point U is 5m in the east of point R. Point V is in north of point Q. Point S is 5m in the east of point V. What is the area of triangle formed by point P, R and Q?
A square ABCD, L is the midpoint of side AB, M is the midpoint of side BC, N is the midpoint of side CD and O is the midpoint of side AD, then find the ratio of area of shaded region PQRS to the area of square ABCD.
If Xl is leakage reactance, Xf is reactance due to field winding, Xdw is reactance due to damper winding and Xa is armature winding reactance then reactance of synchronous generator in subtransient state is due to which of the following?