Bissoy.com
Doctors Medicines MCQs Q&A

A power system network is connected as shown in the figure. Sd1=15+j5 pu Sd2=25+j15 pu Zcable = j0.05pu |V1|=|V2|=1 pu. The torue angle for the system will be __________

A power system network is connected as shown in the figure. Sd1=15+j5 pu Sd2=25+j15 pu Zcable = j0.05pu |V1|=|V2|=1 pu. The torue angle for the system will be __________ Correct Answer 14.4

As the resistance is zero, losses will be zero. PG1=PD1+PD2=40 pu For the equal sharing of load at the station PG1=PG2=20pu Real power flow from bus 1 to 2

Related Questions

A power system network is connected as shown in the figure below. Sd1=15+j5 pu Sd2=25+j15 pu Zcable = j0.05pu |V1|=|V2|=1 pu. The torque angle for the system will be _______
You are the administrator of a Windows 2000 Server computer. The server contains one network adapter and is a file and print server for critical company resources. You install a second network adpater in the server and connect it to the same network subnet as the first adapter. You want to ensure that the first adapter is used for all network traffic and the second adapter is used only if the first adapter fails or is disconnected from the network. You also want to ensure that the server always has network connectivity even if one network adapter fails. What should you do?
At a 33kV 50 Hz to a bus a load of 35 MW is connected. To improve the power factor to unity a synchronous phase modifier is connected taking 5 MW. If the SPM is represented as delta connected impedance, where in each phase we have capacitor connected parallel to resistance forming RC parallel network, then the value of this capacitance is __________
Your network uses TCP/IP as the only network protocol. Devices on the network are configured to use IP address from the private 10.0.0.0 range. All the client computers on the network runs Windows 2000 Professional. The network includes Windows 2000 Server computers and UNIX servers. User's print jobs are sent to shared printers on a Windows 2000 Server computer named PrintServ that directs the print jobs to print devices attached directly to the network. You have a high-capacity print device that is attached to one of the UNIX servers. The UNIX computer uses the LPR printing protocol, and it's IP address is 10.1.1.99. The name of the printer queue is GIANT. You want users to be able to connect to this printer from their computers. What should you do?
At a 33kV 50 Hz to a bus a load of 35 MW is connected. To improve the power factor to unity a synchronous phase modifier is connected taking 5 MW. If the SPM is represented as delta connected impedance, where in each phase we have capacitor connected parallel to resistance forming RC parallel network, then the value of this resistance is ___________
Angle ‘A’ of a cyclic quadrilateral ABCD is 53° less then angle B. Angle B is twice of angle C and angle C is 40° more than angle D. What would be the measure of angle A?
Shweta has connected a cell with a bulb. The bulb didn't glow. What could be the reasons? A. Bulb was connected by the positive terminal from both ends. B. One end of the bulb was connected with a positive terminal and another end was connected with a negative terminal.  C. Bulb was connected by the negative terminal from both ends D. Bulb was fuse.
Which of the following statements regarding tree are correct? (A) All the links of a tree together does not constitute the complement of the corresponding tree (B) A connected subgraph of a connected graph is a tree if there exist (n - 1) nodes of the group (C) A connected subgraph of a connected graph is a tree if there exist many paths between any pair of nodes in it (D) The number of terminal nodes of end vertices of every tree are atleast two (E) Every connected graph has atleast one tree Choose the correct answer from the options given below: (1) (A) and (B) only (2) (B) and (C) only (3) (B) and (D) only (4) (D) and (E) only
The network uses TCP/IP as the only network protocol. You configure the remote access server on the network. Some users report that when they connect to the server they receive the following message |" IPX SPX compatible computer deported error 733" The EPP control network protocol for the network is not available. If the users allow the connection to continue they are able to connect to the services that use TCP/IP. You want to prevent this message from being displayed. What should you do?
If the complementary angle of an angle is 6° less than seven times the original angle, then find the measure of the angle which is 18° more than the supplementary angle of the original angle.