Bissoy.com
Doctors Medicines MCQs Q&A

On which of the following degree of mechanical vibrations produced by the laminations of a transformer depends?

On which of the following degree of mechanical vibrations produced by the laminations of a transformer depends? Correct Answer Tightness of clamping, gauge and size of laminations

Mechanical vibrations produced in a transformer are directly effective due to the tightness of the clamping, gauge og laminations, size of laminations as well. There are various methods in order to reduce their effects.

Related Questions

The degree of mechanical vibrations produced by the laminations of a transformer depends on
Let D be a simple graph on 10 vertices such that there is a vertex of degree 1, a vertex of degree 2, a vertex of degree 3, a vertex of degree 4, a vertex of degree 5, a vertex of degree 6, a vertex of degree 7, a vertex of degree 8 and a vertex of degree 9. What can be the degree of the last vertex?
Study the following statements.i) The displacement method is more useful when degree of kinematic indeterminacy is greater than the degree of static indeterminacy.ii) The displacement method is more useful when degree of kinematic indeterminacy is less than the degree of static indeterminacy.iii) The force method is more useful when degree of static indeterminacy is greater than the degree of kinematic indeterminacy.iv) The force method is more useful when degree of static indeterminacy is less than the degree of kinematic indeterminacy.The correct answer is
The rear window of an automobile is made of thick glass i.e. AB = 5 mm and thermal conductivity is 0.8 W/m degree. To defrost this window, a thin transparent film type heating element has been fixed to its inner surface. For the conditions given below, determine the electric power that must be provided per unit area of window if a temperature 5 degree Celsius is maintained at its outer surface. Interior air temperature and the corresponding surface coefficient are 20 degree Celsius and 12 W/m2 degree. Surrounding air temperature and the corresponding surface coefficient are – 15 degree Celsius and 70 W/m2 degree. Electric heater provides uniform heat flux
The thickness of stator laminations of a 3 phase induction motor, when compared to its rotor laminations, is:
The laminations are manufactured in standard size to minimize the wastage of steel during punching of laminations.
In Induction motor rotor laminations are thicker than stator laminations.
In a core-type single-phase transformer the steel-core is assembled by staggering butt-joint in adjacent layers of laminations vide figures. The purpose served is said to be 1. Avoiding continuous air-gap 2. Preventing loss of mechanical strength 3. Reducing eddy-current loss Which of the above statement are true?
A water line is buried underground in dry soil that has an assumed initial temperature of 4.5 degree Celsius. The pipe may have no flow through it for long period of time, yet it will not be drained in order that no freezing occurs, the pipe must be kept at a temperature not lower than 0 degree Celsius. The pipe is to be designed for a 30 hour period at the beginning of which the soil surface temperature suddenly drops to – 17 degree Celsius. Workout the minimum earth covering needed above the water pipe so as to prevent the possibility of freezing during 36 hour cold spell. The soil in which the pipe is buried has the following properties Density = 640 kg/m3 Specific heat = 1843J/kg degree Thermal conductivity = 0.345 W/m degree
During heat treatment, cylindrical pieces of 25 mm diameter, 30 mm height and at 30 degree Celsius are placed in a furnace at 750 degree Celsius with convective coefficient 80 W/m2 degree. Calculate the time required to heat the pieces to 600 degree Celsius. Assume the following property values Density = 7850 kg /m3 Specific heat = 480 J/kg K Conductivity = 40 W/m degree