Bissoy.com
Doctors Medicines MCQs Q&A

In a given transformer for given applied voltage, which of the following losses remain constant irrespective of load changes?

In a given transformer for given applied voltage, which of the following losses remain constant irrespective of load changes? Correct Answer Hysteresis and eddy current losses

Hysteresis and eddy current losses together called as core-loss in a transformer. These losses remain constant for constant voltage and frequency applied to a transformer, these components remain same irrespective of load.

Related Questions

In a given transformer for given applied voltage, losses which remain constant irrespective of load changes are
In a given transformer for a given applied voltage, which losses remain constant irrespective of load changes?
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
A 100 VA, 120/12 V transformer is to be connected so as to form a step-up transformer. A Primary voltage of 120 V is applied to the transformer. What is the secondary voltage of the transformer?
Consider the following losses for short circuit test on a transformer: 1. Copper loss 2. Copper and iron losses 3. Eddy current and hysteresis losses 4. Friction and windage losses Which of the above is/are correct?
Two involute gears are designed to mesh for a given centre distance and a given angular velocity ratio (other than 1). During assembly, the centre distance has increased slightly. Then which of the following changes occur? (i) Velocity ratio changes (ii) Pressure angle changes (iii) Pitch circle diameter changes (iv) Working depth changes (v) Base circle radius changes Select the correct answer using the code given below.
An AC voltage of 220 V(rms) is applied to the primary of a 10 : 1 step-down transformer. The secondary of the transformer is centre tapped and connected to a full-wave rectifier with a load resistance. The DC voltage appearing the load is
Consider the following statements; 1) In a reinforced concrete member subjected to flexure, the externally applied moment is resisted by an internal couple formed by steel and concrete and their magnitudes vary with the applied moment, while the lever arm of the internal couple remains constant 2) In a prestressed concrete. Member, the external moment is resisted by an internal couple, but it is the lever arm that changes with the loading conditions and the stress in steel remain practically constant Which of the above statements is/are correct?
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is __________
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is