In current commutation, in chopper circuit we use _____________

In current commutation, in chopper circuit we use _____________ Correct Answer 2 auxiliary thyristors and 2 diodes

Two auxiliary thyristors are connected in the chopper circuit along with two diodes, one inductor, one capacitor in series with the voltage supply which is then connected in parallel with diode and DC motor armature.
Bissoy MCQ

Related Questions

A step down chopper has Vs = 230 V and R = 10 Ω. For a duty cycle of 0.4, the power taken by the chopper is 2097 Watts. Find the chopper efficiency. Take the voltage drop across the chopper switch as 2 V.
If in the DC machine, the reversal of current in the coil is faster than ideal or linear commutation then the commutation is said to be __________ commutation.
In voltage commutation, in chopper circuit we use _____________
Find the average output voltage for a type D chopper if it is given a dc supply of 220 V. Chopper frequency is 2 kHz and both the chopper switches are operated for 0.3 ms.
A voltage commutated chopper has the following parameters: Vs = 220 V. Commutation circuit: L = 20 μH and C = 50 μF. Find the effective on period for a constant load current of 80 A and Ton = 800 μsecs.
A voltage commutated chopper has the following parameters: Vs = 220 V. Commutation circuit: L = 20 μH and C = 50 μF. Find the turn-off time for the main SCR with a constant load current of 80 A and Ton = 800 μsecs.
A chopper circuit is fed from an input voltage of 20 V delivers a power of 16 watts. If the chopper efficiency is 80 %, then find the value of input current.
In case of class B commutation or resonant-pulse commutation with L = 5 μH and C = 20 μC with initial voltage across the capacitor (Vs) = 230 V. Find the peak value of resonant current.
What is the expression for design of commutation capacitance in case of a load commutated chopper circuit?
In the chopper circuit, commutation times are _______