How output voltage of chopper can be varied?

How output voltage of chopper can be varied? Correct Answer By using constant and variable frequency systems

The average voltage of the chopper output depends on α, thus, α can be varied by either changing the complete time period or by changing an on time or off time. These two methods are named as constant and variable frequency system.
Bissoy MCQ

Related Questions

A step down chopper has Vs = 230 V and R = 10 Ω. For a duty cycle of 0.4, the power taken by the chopper is 2097 Watts. Find the chopper efficiency. Take the voltage drop across the chopper switch as 2 V.
A step-up chopper has input voltage of 220 V and output voltage of 660 V. If the conducting time of the IGBT based chopper is 100 μs, compute Toff width of the output voltage pulse.
Find the average output voltage for a type D chopper if it is given a dc supply of 220 V. Chopper frequency is 2 kHz and both the chopper switches are operated for 0.3 ms.
For a step-down chopper shown in the figure below, dc source voltage = 230 V and the voltage drop across the chopper = 2 V. Find the value of average output voltage for a duty cycle of 0.4.
For the step-down chopper shown in the figure below, dc source voltage = 230 V and the voltage drop across the chopper = 2 V. Find the value of rms output voltage for a duty cycle of 0.4.
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
In a step down chopper, if Vs = 100 V and the chopper is operated at a duty cycle of 75 %. Find the output voltage.
In the below shown voltage commutated chopper circuit, the chopper operation can only start when
For the step-down chopper shown in the figure below, dc source voltage = 230 V. Find the power input to the chopper If load of R = 10 Ω is connected. Duty cycle = 40 %.
A chopper circuit is fed from an input voltage of 20 V delivers a power of 16 watts. If the chopper efficiency is 80 %, then find the value of input current.