Bissoy.com
Doctors Medicines MCQs Q&A

In shunt and compound motor starting the shunt field should be made on with full starting resistance in ____________

In shunt and compound motor starting the shunt field should be made on with full starting resistance in ____________ Correct Answer Series with armature

In shunt and compound motors starting the shunt field should be switched on with full starting resistance in armature circuit. A short time delay in this position allows the field current to build up to the steady value of the inductive field transients.

Related Questions

A 100KW, 250 V, 400 A, a long shunt compound generator has an armature resistance of 0.025 ohms. There are 1000 shunt fields turns per pole and 3 series field turns per pole. The series field is connected in a such a fashion that positive armature current produces direct-axis MMF which adds to that of the shunt field. Compute the gross MMF at the rated terminal current when shunt field current is 4.7A and speed is 1150 rpm.
Consider the following statements regarding the starting of a dc shunt motor: a. External field resistance should be minimum b. External field resistance should be maximum c. Reduced voltage should be applied to the armature d. Increased voltage should be applied to the armature Which of the above statements are correct?
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
Which of the following statements are correct for dc shunt motor? 1. Speed of a shunt motor is sufficiently constant 2. For the same current input, its starting torque is not high as that of series motor 3. The motor can be directly coupled to a load such as fan whose torque increases with speed Select the correct answer using the code given below.
In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: An induction motor can, therefore, be made without electrical connections to the rotor. B: Three-phase squirrel-cage induction motors are widely used as industrial drives because they are self-starting, reliable and economical. C: An induction motor's rotor can be either wound type or squirrel-cage type. D: An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.
For a given compound DC machine, Net field current obtained from characteristic is equal to 7.5 A, where shunt field current is equal to 5 A, armature current is 505 A, demagnetizing current equal to 0.95 A and shunt field winding of 1000 turns at rated speed of 1000 rpm. What will be the series field turns?
In case of synchronous motor, which of the following are true? a. Synchronous motor is not self-starting b. If the rotor poles are excited by field current and the stator terminals are connected to AC supply, motor vibrates. c. Variable frequency supply is used to start synchronous motor. d. By using frequency converter, a synchronous motor can be brought from standstill to its desired speed.
For a 7.46 kW, 200 V dc shunt motor with full load efficiency of 85% has armature resistance of 0.25 ohms. Calculate the value of starting resistance in ohms for a current 1.5 times of the full load current.
While starting a salient pole synchronous motor by induction motor action and connecting field discharge resistance across field, starting and accelerting torque is produced by
A field coil of a shunt motor has a resistance of 45 Ω at 20° C. Find the average temperature of the winding at the end of the run when the resistance is increased to 48 Ω. The temperature coefficient of resistance is 0.004/°C.