Bissoy.com
Doctors Medicines MCQs Q&A

A 3-phase induction motor taking a line current of 200 A, is started by direct switching. If an auto transformer of with 50% tapping is made to be used, the motor line current and supply line current will be respectively?

A 3-phase induction motor taking a line current of 200 A, is started by direct switching. If an auto transformer of with 50% tapping is made to be used, the motor line current and supply line current will be respectively? Correct Answer 100, 50

The motor line current will reduce by a fold of four times and the line current by half.

Related Questions

In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: An induction motor can, therefore, be made without electrical connections to the rotor. B: Three-phase squirrel-cage induction motors are widely used as industrial drives because they are self-starting, reliable and economical. C: An induction motor's rotor can be either wound type or squirrel-cage type. D: An induction motor or asynchronous motor is an AC electric motor in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.
Consider the following given statements about auto-transformers and choose the one which is/are correct. 1. Auto-transformers require less copper as compared to a conventional,2 winding transformer of the same capacity. 2. Auto-transformers provide isolation between the primary and secondary windings. 3. Auto- transformer has less leakage reactance as compared to the conventional, 2 winding transformer of the same capacity.
A 3-phase induction motor has a starting torque of 200 N-m when switched on-directly to supply. If an auto-transformer with 50% tapping is used for starting, the starting torque would be
If use auto transformer method starting to start an induction motor to replace star-delta method, then the required tapping on the transformer will be _________
A 3-phase, 4-pole, 50 Hz induction motor is uses DOL method of starting. It is later replaced by auto transformer method of starting with a tapping ratio of ‘x’, then the starting current reduces by?
A 3-phase, 4-pole, 50 Hz induction motor is uses DOL method of starting. It is later replaced by auto transformer method of starting with a tapping ratio of ‘x’, then the starting torque will be?
Sita took an auto from her home in Andheri (A) to go to her college in Fatehpuri (F). Rather than continuing straight on the direct road to the college that had no turns, the auto driver took a diversion after 10 km and tumed right at Bandra (B) crossing, then at Colaba T- point (C) after 8 km turned left, again after covering 12 km turned left at Dalhousi Building (D) and soon after 8 km turned right at Elphinston point (E) and after covering 4 km reached Fatehpuri (F). Had the auto driver taken the direct route how much less distance would Sita have actually travelled between the starting point and the destination?
Two autos start from the same stand. Auto A travels 2 km east, then turns to its right and travels further 3 km. Meanwhile auto B travels 5 km north, and then turns West and travels 3 km, then it turns to its left and travels 8 km. Where is auto B with respect to auto A?
Two autos start from the same stand. Auto A travels 2 km East, then turns to its right and travels a further 3 km. Meanwhile auto B travels 5 km North, then turns West and travels 3 km, then it turns to its left and travels 8 km. Where is auto B with respect to auto A?
The insulation resistance values of a Star connected squirrel cage induction motor with motor terminals U, V, W are UV = 0 MΩ; VW = 0 MΩ; UW = 0 MΩ; UE = 200 MΩ; VE = 200 MΩ; WE = 200 MΩ, WE = 200 MΩ. What is the health of the motor ?