Two of the supply terminals to a three phase induction motor gets interchanges while regular scheduling work. When the machine is switched on, then it will _________

Two of the supply terminals to a three phase induction motor gets interchanges while regular scheduling work. When the machine is switched on, then it will _________ Correct Answer rotate in opposite direction

As the supply phase sequence is reversed, the machine’s developed emf will also be reversed.
Bissoy MCQ

Related Questions

A 4-pole, 3-phase slip ring induction motor is used as a frequency changer. Its stator is excited from 3-phase, 50 Hz supply. A load requiring 3-phase, 20 Hz supply is connected to the star-connected rotor through three slip-rings of SRIM. At what two speeds the prime mover should drive the rotor of this SRIM?
If a 400 V, 50 hz star connected, 3-phase squirrel cage induction motor is operated from 400V and 75 Hz supply. The torque that the motor can now provide while drawing rated current from the supply will _________
A 3-phase bridge converter is given a three-phase supply in the phase sequence R-Y-B. Let the neutral to R phase voltage be Vm sinωt. The first SCR (connected to R phase) is fired at an angle of 15°. What is the maximum value at the output terminals at this instant?
A three phase induction motor is sometimes calles a generalized transformer in so far as voltage and frequency transformation has been concerned. How a three phase induction motor operates when rotor frequency is equal to stator frequency?
A three phase induction motor is sometimes called a generalized transformer in so far as voltage and frequency transformation has been concerned. How a three phase induction motor operates when rotor frequency is greater than stator frequency?
A three phase induction motor is sometimes called a generalized transformer in so far as voltage and frequency transformation has been concerned. How a three phase induction motor operates when rotor frequency is less than stator frequency?
Due to the line to ground fault, phase ‘a’ in the induction motor phase supply gets cut, then machine ___________
Shrenik switched on a bulb at 2 : 39 : 40 hours and switched it off on the same day at 12 : 30 : 34 hours. For how long was the bulb in switched-on mode?
An electric motor drives a machine through a speed reducing gear of ratio 9:1. The motor armature, with its shaft and gear wheel, has moment of inertia 0.6 kg-m2. The rotating part of the driven machine has moment of inertia 45 kg-m2. The driven machine has resisting torque of 100 N-m and the efficiency of reduction gear is 95%. Find the power which the motor must develop to drive the machine at a uniform speed of 160 r.p.m.
A capacitor-start single phase induction motor is switched on to supply with its capa-citor replaced by an inductor of equivalent reactance value. It will